Why do new and old plastic and metal -plastic windows in the winter, inside the double -glazed window, outside the apartment, private house, on the balcony, loggias, new buildings, what to do, how to eliminate condensate on plastic windows?

The reasons for fogging plastic windows and ways to eliminate them.

The topic is not new and quite common. Very often, after installing the double -glazed window in the apartment, there is a fogging of new plastic windows. This has never happened with old wooden windows. But not always the reason is the errors of installers and manufacturers of the window.

Why do new and old plastic and metal -plastic windows in the winter, outside, inside the apartment, private house, on the balcony, loggias, new buildings: Reasons: reasons

There are many reasons, here are the main ones:

• Violation of microclimate. It all depends on humidity and temperature in the room. The higher the moisture and lower temperature, the higher the risk of the appearance of droplets on the glass.
• Errors in the installation of windows. This is a violation of the tightness of the double -glazed window.
• Incorrect installation in the level. Simply put, the design is skewed.
• Incorrect angle of tide installation.
• Insufficient sealing the gap between the window and the wall. The gap is formed.

Now many window installation companies refer to the decree:

International norms (ISO, EN standards) also allow the temporary presence of condensate on the internal glass of the double -glazed window. ” (Letter of the Gosstroy of Russia dated 03.21.2002 No. 9-28/200

Flapped glass

Why do the windows sweat inside the double -glazed window, why is condensate formed there?

This is already an alarming bell and talks about the depressurization of the double -glazed window. You need to contact the company with a statement about replacing the double -glazed window. When installing inside the camera, there may be gas or air. The presence or ingestion of dust and moisture is unacceptable. This suggests that serious violations have been made in the manufacture of a double -glazed window.

The seals between the glasses weaken and air and moisture falls into this space. Therefore, condensation is observed.

In old wooden windows, the problem of tightness was solved by sealing windows for the winter. To do this, used adhesive tape, patch and soapy water. Often used foam seals.

Modern windows are 120 times more tight, so such manipulations do not need to be carried out. Although in some companies they are cunning and the leature of double -glazed windows are trying to eliminate the silicone seal. This is not worth doing.

The double -glazed window sweats

What to do, how to eliminate condensate on plastic windows?

The most basic ways to eliminate condensate are:

• An increase in temperature inside the room. Thus, you shift the dew point and prevent condensate dropping. In addition, you can put a heat -mounted in the room.
• Reducing humidity. Actually, the heat -cognrator will also help here. It dries the air in the room and reduces humidity.
• I ventilation. It is necessary to improve ventilation in the room and reduce the moisture content in the room, reduce the temperature. You can simply put on ventilation or make a draft in the whole house for 4-5 minutes.
• If the reason is the wrong installation, then there is no way to do without the help of specialists.

Condensate on the windows

How to process plastic windows so that not sweating?

The stores have a huge amount of funds that prevent glass icing. Among them, a lot is sold at points that implement chemistry for cars. You can use such means. Most often, they are realized in the form of sprays that are conveniently applied.

Overview of chemicals:

• HI-GEAR HG5640. This tool is very good, but the cost is not low. It is necessary to apply a liquid on a clean surface and distribute with a cloth. After 20 minutes, you need to polish the glass with a microfiber. This substance prevents the formation of condensate and freezing of windows.
• Autoland. It is realized in the form of a spray that sprays the product on the glass. Prevents moisture and freezing of windows.
• Lavr anti fog anti -recovery. It is often used by motorists. It is also applied using a convenient sprayer. It prevents condensation and fogging of windows.

Processing plastic windows so as not to sweat

Processing windows from fogging in winter folk remedies: recipes

There are a lot of means that prevent fogging and icing of windows.

Options:

• Salt solution. It is necessary to dissolve 25 g of salt in 4000 ml of warm water and wash the glass with a solution. Salt prevents moisture.
• Vodka or alcohol. After washing the window in the usual way, it is wiped with vodka or alcohol. It evaporates and prevents the appearance of water and condensate on the glass.
• Alcohol with glycerin. It is necessary to mix 1 part glycerol with 10 parts of alcohol. After that, the window is washed and wiped dry. A cotton swab on a clean and dry window is applied a mixture.
• Mixture.Mix 10 g of glycerol with 20 g of potassium oil and 2 g of pine turpentine. Apply this pasta to a piece of cotton and a cotton pad, and wipe the clean glass. Next, let it dry a little and polish with microfiber or special napkins.

Processing plastic windows so as not to sweat

How to eliminate the causes of winding windows?

It all depends on the true cause of fogging. If this is an incorrect installation or insufficient sealing of slopes, then you must contact a specialist. But most often the cause of fogging is a violation of the microclimate.

If you delve into the problem, then the concept of "dew point" exists. This is the ratio of temperature and humidity at which condensate falls. So, if the room is wet air and cool enough, then the windows are sure to get. Actually, it is necessary to heat the air in the room and ventilate. This will adjust the value of the dew point.

The cause of fogging is the lack of an influx of fresh air. In this case, everything is solved by the supply ventilation. In the case of wooden windows, the problem was absent due to the leakage of seams and frames. Because of this, a draft was always observed near the window. Near the plastic window it is not, it is from here that the problem is. The air does not circulate and the temperature difference on the street and the room is huge.

Staging

As you can see, most often the reason for fogging of plastic windows is a violation of the microclimate in the room. Therefore, ventilate the room more often.

Video: Plastic windows fog