How to open an intercom without a key: codes. How to open any intercom without a key: all ways

If you are looking for information about the methods of opening intercom without a special key - our article is for you.

Now it is rarely possible to find the entrance to the entrance of a residential building, not equipped with a protective device. Situations when you need to open the door without a special key are often found.

The intention to search for information on this issue does not necessarily be fraudulent or criminal. Perhaps you do not have the opportunity to access your own entrance due to loss or breakdown of the key, or want to visit a loved one who is sick or does not respond to calls for a long time. In such cases, the opening of the door without a keycard is permitted by law. For other purposes, the use of access without the permission of residents is interpreted as hacking and damage to private property, which can be criminally punishable.

Opening of the intercom with code

How to open any intercom without a key?

• In order to easily enter the entrance equipped with an electronic access restriction system, it is enough to know the specifics of the device itself. In the design of almost every modification, there are a microphone and speaker built into the outer panel. To create the feedback effect, close the intercom panel with the palm of the purpose of maximum isolation from extraneous noise. A high sound will appear (you can hear a similar one if you bring the working microphone closer to the speaker of the column), at the moment of sound reinforcement, you need to pull the door handle. If everything is done correctly, the door lock will be unlocked.
• You can use a special key. This tool allows you to open an intercom in fact any modification, but does not give a 100%guarantee. There are universal keys suitable for certain brands of devices - with such tools, the probability of successful “hacking” will be much higher (up to 99%).
• It is possible to open the intercom, using force. To do this, get your foot at the bottom of the door under the handle and pull sharply. It is not necessary to use great power - it is important to make the right emphasis. Smoothly pulling the handle will also not work - you need a sufficient breakthrough.
• One of the ways to open is the use of piezo-element, for example, from an ordinary lighter. It is necessary to hit the current exactly to the place where the key is inserted. Of course, this method does not always work.
• On the model of intercoms equipped with a touch keyboard, you can act with hypothermia. Check the effectiveness of this method only in winter. To do this, take a handful of snow and press the buttons to the area. When the “ERR” message (after 10-15 minutes) is displayed on the scoreboard, the lock will be unlocked.
• The option is also to shorten the light bulb at the entrance to the entrance. A short circuit will cause a shutdown of electricity in the entrance, which means that the intercom will turn off. This method is one of the most dangerous in terms of possible unpleasant consequences.
• Each intercom has its own software mode. You can use this function after entering a special cipher from the keyboard. Using this code, you can open the door, and also change some system installations. System codes are programmed at the stage of manufacturing the device. For the same model, they are the same by default, but can be replaced during installation and installation. Basically, the installers do not program unique codes, so most devices open using the input of factory ciphers.

Opening of the intercom if the key does not work

How to open a Vizit intercom without a key: codes

Models of the visit are recognized as one of the most protected, and the most difficult in terms of opening. On the keyboard of some models there are no buttons * and #, instead the characters “C” and “K” are introduced.

• If the systems set by default have not been made to the system installations, access can be input in the code *#4230 or 12#345.
• The latest models of audio domains Visits open using ciphers *#423 or 67#890.
• To unlock the lock through the service functions of the device, dial # 999wait 2 short sound signals, then enter the system password 1234. If the password was entered correctly, a single high sound will be heard, if it was erroneous, a two -tonal signal. Then try to use one of the possible digital combinations: 0000, 6767, 3535, 9999, 12345, 11639.
• If you managed to enter the software mode of the device using any of these options, type the following characters: 2 # 3535 - inclusion of the cancellation function of the door lock
• Pressing the button " H»Allows you to program user keys. Press your magnetic key to the reader, while holding the key pressed #until you hear a short sound signal - your key is saved in hardware memory.
• * - exit from the current settings of parameters, # - Confirmation of the modifications made.

Intercom Vizt

Video: how to open the Vizit intercom. Domophone code Vizit.

How to open the Cyfral CCD intercom without a key?

Cyfral devices are the most common in our country. Such models were installed for a long time, but most modifications have standard access codes.

• Method 1
  If there are apartments with rooms with a multiple of 100 at the entrance, complete:
  "B" CHIFR1 "B" CHIFR2
  CHIFR1 - apartment number
  CHIFR2 - 2323, 7272, 7273
  In other words, you must introduce "B" 300 "B" 2323.
• Method 2
  Use one of the options:
  "B" 41
  "B" 1410

Some modifications of digital open after the introduction of numbers 07054.

The CCD-2094.1M model opens as follows:

• "B" 0000
  The door is unlocked or the device will be converted into a system setting mode (the message will be displayed on the screen " On"). After that, enter the figure 2.
• If on the scoreboard you see a message " Off“, It means that the set of standard codes was reprogrammed during the installation process and you will have to abandon the idea of \u200b\u200bbreaking the door.

To hack the CCD-2094M model, use the code 0000 and press " B.«.

• Symbols should be displayed on the scoreboard " COD". Then dial one of the combinations:
  123456 "B"
  456999 "B"
  123400 "B"
• Wait for a second until a message appears on the monitor " F0" - then access to the program settings menu will be open. To enter the code 601.

If necessary, on this model you can try to set your own key to the number of digits, if you have one:

• Hold the key " B.»In the pressed position until the device goes into service setting mode.
• Then click 5 And enter the number of the desired apartment. If a message has been displayed on the scoreboard " Touch", Bring the key to determining and preserving in memory.

Intercom Cyfral

How to open without a key intercom Metacom: codes

The opening of most metacoma models is performed in the following way:

• Press the call, indicate the initial number of the apartment from all located in your entrance, and again the call. On the screen you will see a message " COD“, After which you will need to specify the symbols 5702.
• If this technique has not brought the expected effect, use the symbols: 65535 call 1234 call 8

The MK-20 M/T metakom model is characterized by the fact that this device does not provide for a software limit system for determining the master key. Thus, if you press the unenched key to the reader, the programming mode will automatically be turned on, which will unlock the door.

If there is no possibility of using the key:
call 27 Call 5702
call call 4526

Intercom metakom

How to open the Eltis intercom without a key?

Eltis models are considered the simplest in terms of opening, as they have a small number of system codes and low access protection:

call 100 Call 2323
Call 100 Call 7373

The intercom Eltis

Video: how to open the intercom Cyfral, Eltis, Vizit.

How to open the Marshal intercom without a key?

For models from this manufacturer, enter from the keyboard the maximum number of the apartment in the entrance, increased by 1 (for example, if the largest number 15, then indicate 16), and then " TO» 5555. This method works on most devices of the Marshal brand.

Intercom Marshal

How to open an intercom Factorial without a key: codes

• The procedure for opening a factorial is similar using systemic functions of Cyfral models. Entrance to software settings is made by a set of one of the 6-digit codes (use characters 000000 or 123456).
• Representatives of the company claim that the hacking of the apparatus of this brand is almost impossible, since replacing the system code during the installation process is an integral condition of the service.
• Try applying the following combination:
  Hold the button with the number 5 before the system message on the monitor, then dial 180180 call 4 call.

The intercom Factorial

How to open Rainmann and Raikmann: codes

Although the names of these models are very similar, Rainmann and Raikmann devices are actually different devices.

• Raikmann modifications are programmatically protected from hacking, so it will not work to open them through the introduction of code without a key.
• Rainmann CD-2000 can be hacking by clicking the button " key", Then the sequence of numbers 987654. After a short signal, enter 123456. If the settings mode are available, the symbol will appear on the scoreboard " P.“Then we click the figure 8. If the door does not open, it is not recommended to press anything else, since the device can be blocked.

How to open an intercom with those without a key?

It is believed that the doors equipped with the models by those cannot be opened without a key. To try to do this, you need to have some magnetic key to the device of this brand. Try to perform a sequence of actions:

• Close the buttons 1, 6, 0 together (in some models 2, 5, 8).
• Then let go in the reverse order one at first, first 0, then 6 and 1 (8, 5, 2).
• After a sound signal, enter the factory key 4321.
• Click calling.
• Bring the key to the reading element - the lock will be unlocked.

The intercom

How to open a intercom safe service without a key?

Safe Service intercoms can have various codes depending on the modification of the device. Standard codes set during the manufacture process are 000000 or 123456.

If the factory cipher is not suitable, use the following recommendations:

• Click the figure H And hold in this position until the entrance to the software menu appears on the screen.
• Enter a code 180180, call, figure 4 - The device remembers the combination and opens access to the door.

Some models of the Service safe can be opened using a conventional 6-12V battery. To do this, remove the lower panel of the device under which the fasteners are located. Between them you can see a small connector, it is in this place that the battery is applied, which allows you to unlock the door.

Intercom Service Service

How to open the Laskomex intercom without a key?

These devices are a digital lock. Access to it is provided by entering the service mode:

• Click four times in turn the key key And 0.
• Take a system password 6666.
• A message should appear on the scoreboard SSSS, then R- (This indicates the opening of the settings mode).
• Click the figure 8 (code for canceling the door blocking).

LASKOMEX intercom

How to open an intercom striker without a key?

Quite little useful information is posted about the possibilities of access to the forward models. You can try to use standard keys:
123*2427101
"K" Pause 1234
2427101

If you have a key key from the apparatus of this brand, try to reprogram the device:

• Enter 77395201*0*
• Press the key to the reader and press the symbol # twice

How to open an intercom crown without a key?

Hacking devices of this manufacturer is almost impossible. Service key 951, but the warranty condition for the installation is a mandatory change in the system code.

How can I open an intercom without a key system?

For devices of this manufacturer, it is not provided for the possibility of entering system codes. The only option to open such a model will be included in the software menu and install the user cipher.

• Hold the button " B.»Before displaying inscriptions on the scoreboard" SYS«.
• enter password 1234.
• Enter your own code.

The intercom Structure master

As a conclusion, it should be noted that not all of the listed methods of opening can work with individual models of devices. The reason for this may be a change in system settings, the difference in the modification of the device and the features of hardware installation. It should also be borne in mind that the latest domain models are equipped with improved means of protection against undesirable access and management.

Video: 5 cool life hacks with intercom / How to open an intercom

If you still have not been able to enter without a lost or broken key, contact the service center of the service company to receive a new one.