Support for the phone with your own hands: out of paper, out of the box from the cassette, the lego stand, from the wooden bar, from the pencils, from the wooden sticks from ice cream, from the plastic card, the holder for the phone during charging, stand from cylinders from toilet paper, from Clips, Support-throne, in the form of a bearish, in a car, holder-rack

To create a phone holder simply use our advice.

The content of the article

In the world of technological progress, it is difficult to imagine a person who would not have a mobile device.

Many people are watching movies in our time, read or learn any information mainly on a mobile device. It happens that we make several cases together, for example, we read something or look and at the same time we prepare, cut food or stroit. We have to describe the phone to the remedies, such as a book or a cup.

Original stand for phone yourself

You can buy any support now in the online store, but at the same time the price will greatly hit your wallet. Why not connect all your skills and fantasy and not make it yourself?

Stand materials can be different:

Paper.
Wood.
Plastic.
Polymer clay.
Gypsum.
Any natural materials.

You can put into the course of all the materials that you will have at hand. The supports made by the supports you will definitely not find in stores. So create! So that your stand is not only functional, but also was original, it is necessary to pick up the color, size, design design.

You can make a lot of different supports from simple to the most difficult. The simplest takes only a couple of minutes of your time, and to make some difficult skills will need.

Stand for a paper phone

The simplest stand will be made of paper in just a matter of seconds. But the plus it is that this stand can be done anywhere, having a piece of just a piece of paper A4.

Stand

To make it you need to take paper, bend it along to get 3 layers. Then fold the paper again and make the bend across it so as to get three wide parties the same in width and one side are small. The last step is to make 2 small bends.

Stand for the phone from the box from the cassette

If your parents have old tapes for a tape recorder, then you can use the box as a stand. In total, it is necessary to deploy it and insert a phone in the cussette compartment. You can decorate it with paint from the canister.

From cassette

Lego phone stand

If the boy grows in the family, then he will definitely have a couple of details of LEGO.

Lego

A total of a rectangular plate is needed and a pair of small parts to fix the phone so that it does not fall. Bright details will raise your spirits, will delight the eye and will also be easy to use.

Stand for the phone from a wooden bar

There are many options choosing which you will make any model. This stand will come out durable. However, to make it a single sketch will be not enough. It will take the equipment and skill to work on a tree.

To start working with a tree, you need to make a sketch, all the details are fixed by special tools for woodworking. In general, it is not difficult to make such a stand, if you have a factories and dedication.

From wood

In the board it is necessary to make a hole at the angle of the required width. This stand must be sufficiently long and stable so that the gadget does not fall and stood firmly. Before use, you need to polish the product with sandpaper. The mobile device will be firmly standing in it, and it will last for quite a long time.

So that the stand is always in sight and was not lost in the pile of papers, it should be made solid and from a good material. So she will last long and will stand firmly, and look impressive. This stand is suitable not only for a mobile device, but also for tablets.

Make it quite simple. It is necessary to take two the same wooden blanks. They should be rectangular. On both items, make a hole from the edge to the middle. The hole should not go at an angle of 90 degrees, but by the painter.

To make the phone or slid, you need to make a slot on a detail that will stand horizontally. You can also glue a small plank that will serve as a support. When all the details are ready to get off the blanks and cover with varnish. Such a stand can be made of different shapes.

Stand for the phone from pencils

6 pencils.
4 gum.

Interesting

We need to make a bulk figure. Start from the triangle and gradually add one face, bonding the pencils with rubber bands.

If you have 3 pieces of segments from wood in the house. With the help of a wood glue, you can collect a durable stand.

Stand for the phone of wooden sticks from ice cream

If your home has wooden sticks from ice cream, they will serve as an excellent stand material. With the help of glue, assemble the stand pockets for your phone. It can be painted in different colors or decorate at your discretion.

Plastic Card Phone Stand

Holding a card, vertically bend 1-1.5 cm bottom side forward - it will be a tripod for the device. Now the remaining height will divide in half and bend back - it will be the back wall. Ready!

Phone holder during charging

Sometimes you do not know where to put the phone when it is charging. To do this, helping you will come to help. Such a holder can be made from a plastic bottle of shampoo. It is necessary to cut the neck. With the help of a marker, take in the middle of the bottle of the line. Then the line must be cut with sharp scissors. On the other hand, cut the hole for the outlet. A bottle can be decorated with bright paper. To start charging the phone, just thread into the hole for charging the cord, and put the phone into improvised pockets.

Decoration

You can also use tight paper, bend it in half and in each one of the ends to make holes for the outlet. From denim you can also make a stand to conveniently charge the phone. To do this, you will need only old jeans and scissors. Cut the jeans of pockets along with the lining cloth and make a loop by cutting off the upper seam from the pocket. All stand is ready!

Stand for phone cylinders from toilet paper

You can also use cylinders from toilet paper. In the cylinder, make a hole in the width of your phone, the cylinder itself lock using the paper buttons by making the legs.

From the sleeve

This stand can be coloring, wrapped with twine or multi-colored threads, but at the same time make a larger hole. You can also enclose decorative paper or silk ribbons. There are no restrictions on your fantasies.

Stand for phone clamps

Take two stationery clamps. Generate one semicircular detail inside. It will serve as an obstacle for the phone so that it does not roll. Insert one binder in another. The phone should be put so that it relieves one of the clamps.

From the clips

Phone Stand

Stand in the form of a throne from the famous and beloved TV series game of thrones.

Materials required for work:

Dense cardboard.
Plastic swords.
Thermopystole.
Polymer clay.
Resistant paint black and silver color.

Throne

Beginning of work:

After removing the measurement from your phone, make a blank in the form of a throne. If you do not have experience with clay, the workpiece should be made from cardboard, all parts glue with a thermopystole.
The basis of cardboard is placed by polymer clay. Also from clay make blanks in the form of swords, and stick to the back. Additional up the contour of the back of the back of the back.
Dry the workpiece in the oven.
Cooled workpiece cover in black. Let dry. Using a dry sponge or rigid brush, walk, silver paint slightly touching. When the paint gets free, make a hole for the phone.

Stand for a phone in the form of a bear

Polymer clay of red and brown.
Food foil.
Sand.
Little polyethylene package.
Gum.
Wooden toothpicks.
Roll for modeling.

Medshound

Getting to work:

From foil Make a frame for a bear body in the shape of a pear. To the top stick the wooden toothpick to fasten the head. At the body attach a little clay.
In the package, pour a little sand, and insert the workpiece from the foil, tightly engaged, rubber bands. Rolling the brown clay and take the body torso.
Using acute toothpicks, make a bear wool. Make your paws and attach them at such a distance so that the phone is stable stably. Also make a fur on my paws.
Crave the head of the bear, nose, ears, tail. Eye can be done using beads. Attach your head to the body. Put in the oven, pre-put on the foil. Using the foil, make a sample phone and put on the paws. Now let's go to the paws that will hold the phone. Again put in the oven. You can make a decoration for a bears in the form of a bow of red and bake again.

The unusual stand is ready!

Holders for phones in cars

Choosing a stand, each follows its preferences. But this is not so important, the main thing is that the holder is fastened to be well, so that he does not fall down when driving.

Stand for your phone make much easier than the car holder. After all, you still have to find a place where it will be attached. Let's look at a few of them:

The fiscal way will be purchased in the store to the stationery scotch or adhesive tape. One side must be glued to the device, and the other on the torpedo. Before gluing tape, all surfaces need to wipe from dust and pollution. Such a holder, though budget, but at the first pit he will dug.
Paper clamp. Tighten the brackets, bent the binder, wrap thick thread, put again in place and fix them together with rubber band. Break this device to the stove. With such a device, the phone will be held tightly, but to take out back will be problematic. Another disadvantage that the angle of the phone can not be changed, otherwise you can break the grille.
You can also use the wire, but you have to damage the instrument panel in the car. Also this holder for phones in a book cover. To do this, you need to take a wire that does not convert over time and drill 2 holes in the torpedo. Bend the wire and insert into the holes. There will be a minus: hard-to-access the tape recorder and the panel will remain holes.

Just

Rack holder for phone in the car

We need:

Aluminum tube with a diameter of 47 mm.
2 Angular connecting tubes 45 and 90 degrees. You can buy them in any construction store.
Wooden sticks from ice cream.
Glue of good quality.
Case for mobile device.
Cable ties for fastening the case.
Hacksaw.
Ruler.
A sharp knife.

Stages of work:

After we chose a place to install the phone, proceed to work. Aluminum tube cut into 3 parts. The shortest will be attached to the corner tube of 45 degrees. The horizontal part connects the angular tubes 90 degrees and 45. The size of the vertical tube is 10-13 cm. It will keep the rack itself. All items must be placed on glue.
In the case it is necessary to make 3 outbreaks. Cuts are parallel. In the holes to the gross tie. If the ends are long cut them. Cut wooden flat sticks and insert them between a cover and tube and attach glue.
Now proceed to the installation. Attach the connecting tube. Ready!

All presented stands can be beautifully issued. It can be: paints, butt, sequins, beads. It will also be a wonderful gift for friends or relatives, because it can always come in handy, even if you already have one.

Do not be afraid to experiment and fantasize so that the stand, made by your hands, was exceptional, and not like everyone else. Make a unique thing that will be in a single instance. Even if you do not have enough experience, you do not be upset in work from the tree, following our instructions, you will be released. The main thing to start working with a good positive mood.