How to make a phone case with your own hands: out of paper, from cardboard. How to sew the case for mobile fabric, felt, leather: step-by-step descriptions, photos. How to make a case for a mobile balloon?

How to make a case for mobile: from fabric, paper, felt, balloon.

Owners of communication salons take care of their customers and are inhibited by goods that will necessarily need early or later users of smartphones, tablets. Among such goods are various covers for gadgets.
But the search for a suitable model can be frustrated by disappointment due to a completely common problem - the set of stamped as if under the copy of the models of covers and restrictions in the possibility of choosing the color of the cover for a specific gadget.
But so I want the usual phone to stand out against the background of the rest, in addition to the built-in functions, which only the owner knows, also a beautiful, stylish "robe" - performed with his own hands in some unusual technique.

We have collected for you a selection of lessons and descriptions for the manufacture of covers for handmade gadgets: from simple models to complex.

Here you will find options for making covers from budgetary materials that quickly come into disrepair, and also learn how to make a beautiful and original case for your phone from materials that will still successfully fulfill their basic task - to respond to the safety and broadcast your individuality.

Budget ways of making a cover for phone

IMPORTANT: Before starting work, we will stop at the choice of materials. Finished work should not annoy the owner of the phone both in relation to the combination of colors, invoice and in relation to the fact that additional decorative elements will be on the case.

It is worth thinking whether the gadget owner will irritate the protruding parts or decor elements partially will perform the role of antidepressants: a fringe, for example, you can sort out with your fingers during a tightened conversation, and the smooth surface of the cover will help calm down.

What can I do?

Case can be sewn using fabric, felt, skin
For the manufacture of a simple case, tight paper is suitable
Handmade style covers make it with hot glue.
A plastic or transparent case can also perform the role of the basis for the protective coating made by hand

Fabric phone case: how to sew?

The fabric cover can be multifunctional. If you sew additional tissue separators, you can use a business card storage case or bank cards.
And if you wash a little more, then for a flash drive or key you can sew individual pockets.
The World Wide Web offers us a lot of paintings and ready-made design solutions for homemade textile covers. For example, a case-organizer. For sewing, a simple pattern is used. The wint of the design of the case is an interesting print on the fabric.

Case Organizer for Mobile Tie

The main advantage of the fabric cover is that it is sufficient. Featuring the original print, you can create a unique case.

Fabric Case for Mobile with Bright Print

Case Organizer Fabric for Mobile

Fabric Cover Organizer

Original design of a tissue cover

Fabric Case for Mobile

Fabric Case for the phone, sewn by an individual pattern, is a great version of the protective coating for a non-standard size smartphone, because you yourself will be able to design a model, pick up the appropriate decor elements.

After reviewing the photographs of the handmade telephone covers, you can easily select the way to create that is most suitable for your gadget, and it will not be necessary to waste time on the useless running on shopping in the search for the necessary materials.
Perhaps your phone case will be better. In any case, the handicraft from the category of practical will be used for its intended purpose, and the phone in the new case will acquire individuality.

Instructions for making a textile cover for a smartphone:

Before you start work, we place a gadget on the selected segment of the fabric and draw contours.
On the finished pattern, we indicate the location of the buttons and the camera, and make indents from the edges by centimeter. The indents will be needed to cross the protective coating parts. Cut two parts identical in size - the front and back side of the cover. We flash the edges.

Transfer the contours of the gadget using a handle or a simple pencil

Tissue Gadget Case

Leather Case

Video: Leather Phone Case

Paper Case: Detailed Instructions

One of the most budget ways to manufacture a phone cover involves the use of paper. There are also cons of such crafts - its short operating period.

What do you need?

Paper sheet A4 (color depends on your personal preferences)
PVA glue

The manufacturing process can be divided into several stages:

The gadget is located on paper so to wrap the phone and a small distance to the edge of the paper sheet remains.
Canceling the edge of the paper below two additions.
Formed triangles with a bending of the bottom half bend up. To keep the edges tightly, squeeze them and press them.

In more detail, the method of manufacturing a paper protective coating for a gadget is shown in the video.

Video: Phone Case in Origami

Openwork telephone cover: Manufacturing instructions

Glue-gun for this craft is the main tool. However, we will not be limited to this tool. Armed with the following materials:

nail polish
scotch
parchment

Openwork case with your own hands

How to make a phone case?

Stage 1:

Parchment sheet turns around the smartphone, overlapping a sheet on each other at the joints of the panels.
The screen is closed by parchment by fixing it with a scotch.

Stage 2:

Draw the outline for holes where the camera, sockets and buttons are located on the gadget.
Cover hot glue edges of the side panels of the gadget.
We apply glue along the circuits for the camera and buttons.
Apply ornament on the rear wall of the gadget. The sidewall of the gadget is smoothly merged with elements of the ornament. We are waiting until the drawing will dry out.

Stage 3:

On the surface of the adhesive ornament, we apply a thin layer of nail polish, which can be replaced with acrylic paint. We are waiting until the paint is dry.
We dress the original coating with the ornament on the gadget.

The process of manufacturing a cover using hot glue you can look in the video below.

Video: Case for the phone of hot glue

Waterproof case for phone: how to do?

The case for the phone from the waterproof material is a great way to maintain a gadget from moisture from getting inside the housing. This is especially true for school children's telephone owners.

Make such a case - the case of five minutes, provided that you carefully read the instructions and will exactly follow the recommendations.

Balloon

In the pine ball, leave the tip is not knotted.
We have a phone on the shield of the screen up. We begin to lower the gadget inside the balloon so that it is gradually blown away.
We let go of the ball, without stopping squeezing with his smartphone. The edges of a fouched ball will be enshrined along the contours of the gadget. So we made a useful practical thing for the smartphone. We admire and hurry to brag my relatives!

Below is a video - instruction on the conversion of a ball into a smartphone cover.

Video: balloon phone case

Cover book for phone: manufacturing technology

Prepare a notebook with a rubber band, considering that its size is equal to the size of the gadget.
Armed also with a stationery, ruler, glue, simple pencil, felt thin, cardboard sheet, narrow rubber band.

How to make a phone book for your phone?

Cut two sheets for the cover. Measuring the thickness of the notepad, cut out the sidewalls by the stationery knife.
We determine which of the sides of the facial, and on the sideways spend a simple pencil straight on the center line. Slash strictly by drawn straight. Sut off the tape with a width of 0.5 cm. It will bend a book.
Inside the sidewinks, we wash glue.
The edge of the front side of the notepad is described on a fetter a simple pencil. Cut the drawn item.

Book Case for Gadget

For the reverse side of the cover it will be needed felt. We carry out the contour with a simple pencil, attaching a notebook to the feta. The part carved from the felt is cut, directing the incision along the lateral bend. We glue this item to the cover.
Next, we translate the outline of the gadget to the cardboard. Cut. It will be the basis for the cover. Fix glue this part with a detail of felt. Cut out, leaving a strip of 1 cm from the edge of the sheet. We will make two cuts at the corners of the fetal part of the cover and glue corners.
Fix two rubber bands, having them across. Glue a blank on a notepad of a notepad that bends in half. Case ready.

The video below reveals the technical side of the production process-cover books.

Video: Case-book for mobile

Case for phone cardboard

Prepare besides cardboard, and other tools necessary for the paper:

scissors
glue
marker
gum.

Cardboard case for phone

The manufacturing process for the phone cover:

Describes the gadget on cardboard. We will need 2 pieces. Reserve between the parts about 5 cm and cut.
According to the median lines of each part doing bends, using a ruler or dull side of scissors. Expand phone back toward you. Fasten one side of the cover, fixing glue.
Using a thin rubber band for locking the cover part. Fix them so that the cover can be easily open and close.

More information on making a cover in the video below.

Video: Cardboard case for phone

Case for phone with application: how to make?

Felt Phone Case with application: Option 1

Materials and tools:

Felt (select the color for drawing conceived)
Needle, thread or a different contrasting color
Glue gun, scissors, a ruler, a pencil

Felt Phone Case

The manufacturing process of the felt cover:

Phone put on the felt and in pencil transfer circuit. We need two identical parts.
After completing the face of the seam joining the two parts together. Prepare a blank for application. You can pick up any simple drawing and take appropriate felt colors.
We propose to make applications in the form of balloons and a small house.
We cut a lot of blanks in the form of droplets. This will be our balloons. For the house felt better to take a contrasting color or slightly lighter background. The windows in the house cut out of yellow felt.

How to make a bag of felt

Sticking a house at the bottom of the cover. Sews small stitches a few ropes of balls, trying to place them in a cone with the apex of the cone at the bottom (on the roof of the house). Sticking balls, placing layers. When all the parts dry out, cover can be used for other purposes.

Video: Case made of felt with their hands

Felt Phone Case: Version 2

Materials and tools:

Felt
Thread, needle
scissors
Paint (acrylic)
Several sheets of colored paper (depending on what is selected for the operation of the application)
Glue, Stencil

Bag of felt applique

Write the size of the phone and transferred to the felt pattern. Cut two identical parts.
On one of the billets, we transfer the picture selected by us for appliqué.
Cut the felt elements of appliqués (Sponge Bob's face). Clothes for our character can also be cut from felt or pick up the cloth of the desired color.
When the appliqué details are reliably fixed on the basis of the cover, we can proceed to the last step: crossing blanks from the back side.

Video: How to make a cover for the phone Spongebob Sponge?

Important: In the absence of time or elementary sewing skills, you can apply another way to fix the pattern of pattern on the case - glue them to the base. By doing in this case, a simple firmware along the contours of all items, you will give reliability to your craft. Agree, presented with a close person, made by your own hands, the cover will bring joy if used by appointment and will not lose its initial species after a long period.

Video: Cover for your own hands

How to make an original case for your hands?

Method 1: Original Monster Phone Case

Case for smartphone will be created from a transparent cover. We will need a glue-gun. We draw hot glue over the surface of a transparent drop cover, as if they were glad to be transparent. The video presented below shows the method of applying drops to the case.
When the drops will be lit, we will apply acrylic paint to the surface of the cover. You can use several colors. Then work will look more interesting. If you wish to the top of the cover, you can glue the eyes.

Method Second: Case with Sticker

For the manufacture of the cover, a transparent protective coating will be needed. We apply the glue layer on the front side of the sticker and glue the picture on the back side of the transparent cover. Covered acrylic paint the inner surface of the cover. After drying, the paint case can be applied by destination.

Method Three: Silicone Case

We purchase white silicone in a construction store. We mix it with starch for 5-7 minutes. After the starch is absorbed, we begin to roll silicone evenly into the cake. I turn around the phone with a food film, after which I "burn" it into silicone cake.
We leave so hour. An hour later, we begin to carefully free the phone from the silicone shell. Cut off the extra pieces of silicone. Cut the holes for the camera and buttons. Email processing the surface of the silicone billet.
Unicorn horn make a small piece of silicone. Also make both the paws. Fix all additional elements to the base of the cover. We proceed to the most interesting: we will make the mane of the unicorn of wool.
A black marker draw eyes and a nicoon face.