The St. George tape is a constant symbol of victory for many years. Few know her story and understand the importance of this attribute. Where to wear the St. George tape, how to tie it beautifully - you will find answers in the article.
The content of the article
- How can you tie a St. George ribbon?
- How to tie a St. George ribbon step by step
- How to tie a St. George ribbon with a bow?
- How to tie a St. George ribbon with a tie?
- How to tie a St. George ribbon with a star?
- Video: how to tie a St. George ribbon with a rose
- How to tie a St. George ribbon with a flower, scheme
- How to tie a St. George ribbon on a car and a bag?
- How beautiful to tie the St. George tape, video
Wearing a tape folded in the form of various figures is gaining popularity. It is not necessary to purchase this symbol, you may well tie a ribbon on your own on the eve of Victory Day.
How can you tie a St. George ribbon?
There are no difficulties in tying a ribbon on their own in order to decorate on clothes, a bag. You can even beautifully tie a ribbon on the car. Despite the fact that it becomes popular to decorate with a ribbon everything that will wish in honor of the memory of the heroes and, as a sign of respect, attach a ribbon to clothes on the left side. So you do not desecrate the sacred symbol, but show reverence for the memory of the fallen. You can attach the ribbon by fixing it with an English pin or making a brooch. You can purchase the base for a brooch or use a regular pin.
Several ways:
- The loop
- Lightning
- Letter m
- Butterfly
- Bow
- Tie
- Star
- Rose
- Flower
- You can make from the St. George tape kansashi brooch
How to tie a St. George tape
How to tie a St. George ribbon step by step
- As mentioned above, tie the tape loop - The most common and easy way. The main thing is that one end of the loop is slightly higher than the other
St. George Ribbon
- To obtain a figure - lightning:
Fold the tape three times
Pull the upper end to the right
St. George tape - lightning
- The tape in the form letters m:
Fold the tape in half 2 times
Pull the upper end to the right
Lower - to the left
Georgievskaya tape with the letter M (May)
How to tie a St. George ribbon with a bow?
Classic bow You can easily get 2 loops. Pin the middle with a pin, in the place of overwhelming two ribbons. If you tie the middle with a ribbon, wrap it with a thread or fix it with an elastic band, then the bow will look more elegant.
Bant from the St. George tape
For st. George Bant You will need 4 segments of the St. George ribbon more complicated.
- Cut pieces 18, 9 (x2), 5cm from the tape
- Fold the long segment in half so that the joint is in the middle
- A segment of 5 cm wrap the resulting workpiece in the middle, closing the joint. Fix everything with glue or threads
- In two identical segments, pull one edge and cut the other cloves
- Attach the ends to the workpiece
Georgievsky bow
Interesting a man in the form of a man You can fold from 4 segments of the St. George tape
- Cut the ribbons 24, 14, 10 and 7 cm long
- Make a loop from the longest tape
- Turn the ribbons 10 and 14 cm into the ring, press and put on each other, fixed with a pin
- At the place of fastening, wrap the 7cm tape with a pin with a pin
- Put the workpiece on the prepared loop
- Fight all the details with each other with threads, glue pistol or pins
- The center can decorate with a flower or rhinestone
Bant from the St. George tape
You can make from a very long tape chic bow:
- Put the end of the tape on the table (about 35-40cm)
- Lay the tape in layers on top of it, make each row in short 4-6cm on each side
- Leave the end of the tape about 20 cm long from the center of the bow
- Fasten the layers with a pin
- Cut the ends with a zigzag and place the corner
Chic bow from St. George's tape
A bow in the form of an eight It looks unusual, but making it very simple:
- Take a tape 25-30cm long
- Fold the tape eight, fix the edges
- Tie the eight at the junction of a smaller ribbon at the junction, fix it
- From two black ribbons, 20-25cm long, fold the cross
- Combine all the details
Bant from St. George's tape in the form of an eight
How to tie a St. George ribbon with a tie?
Georgian tie
Such a tie looks beautiful and unobtrusive, especially on kids.
- Wrap the tape around so that the length of the right end is greater than the left
- Put the left end on the right, letting it under it
- Make another circular weaving, forming a loop
- Pass the right end into the formed loop, moving from the bottom up
- Pull it out of the loop, then take it into the ear
- Tighten
How to tie a tie from the St. George tape
The algorithm for tying the St. George tape is no different from tying an ordinary tie and amazes with a variety of nodes. I suggest you get acquainted with several schemes more complicated:
How to tie a tie
Georgian tie
Georgian tie
How to tie a St. George ribbon with a star?
In order to make a star from the St. George tape you will need 5 segments 6 cm long.
- Sew the segment in half in the middle
- Bend the segment, forming a ray
- Repeat the same with the rest of the segments
- Collect all the rays together and form an asterisk
Asterisk for Victory Day
- You can make a bow, as described above (bow-dumpling), from two segments connected by a cross. Place the star in the center of the bow - in this way you will get a wonderful brooch
Brooch from St. George tape
In order to get a pointed star:
- Cut from tape 5 segments 6 cm long
- Fold the segment in half and cut at an angle. As a result, you will get a trapezoid
- Solder the cut places with a soldering iron or, in extreme cases, sew them or glue them
- Turn it out to the wrong side
- Repeat the procedure with the rest of the four segments
How to make a star from St. George's tape
- Next, you can connect the rays with a soldering iron. Depending on what sides you will connect the rays, you will get different star options
Star to Victory Day
The star from the satin ribbon looks beautiful. If you do not have a soldering iron, you can steal the ends with a lighter or above the flame of a candle.
- Cut 5 segments with a length of 3.5 cm and one - 11cm
- Fold the short segment in half horizontally and stock up on one side
- Expand so that the corner turns out
- Bend the edge, connecting with the next black line, repeat for the second edge
- Sold up the end
How to make a star on May 9
- Repeat the operation with other segments
- Combine the rays
- Fold the long segment with the letter L, after cutting the edges with cloves
- Connect the details, you can add some decoration to the center
Georgian star
Video: how to tie a St. George ribbon with a rose
To make a rose by May 9, you will have to stock up on perseverance and patience.
How to tie a St. George ribbon with a flower, scheme
- Prepare five segments of the St. George tape 6 cm long and one segment 15cm
- Bend each short segment in half
- Stir all the petals onto the thread and tighten it, forming a flower
How to make a flower from the St. George tape
- Fold the long segment with the letter l
- Sew the flower to the ribbon
- You can decorate the middle with a rhinestone or icon
Flower by May 9
How to tie a St. George ribbon on a car and a bag?
The St. George tape is a symbol of victory, a tribute to the heroes, so follow its appearance. It is unacceptable to use the tape instead of laces or collar on a dog or cat. If you do not want to attach the tape to clothes, you can tie it on the handle of the bag, the car antenna or the rear view mirror.
How to tie a St. George tape on a car
How to tie a St. George tape on a bag