How to make a palm with your own hands in stages from plastic bottles: step -by -step instructions. How to make a barrel, crown, fix the leaves on a palm tree from plastic bottles? Decorative palm tree made of plastic bottles to the country: ideas, photo

Instructions for the manufacture of palm trees from plastic bottles.

At the moment, there are a lot of ways to decorate your country site. For this, plastic bottles, tires and flower pots are used. If desired and good imagination, you can independently come up with a new option for creating an exotic tree.

DIY decorative palm trees in the country: ideas, photo

The main materials for the manufacture of palm trees to the cottage:

• Plastic bottles
• Tires
• Flower pots

Below are interesting and non -standard options for making palm trees for a summer cottage.

DIY decorative palm trees in the country: ideas, photo

DIY decorative palm trees in the country: ideas, photo

DIY decorative palm trees in the country: ideas, photo

DIY decorative palm trees in the country: ideas, photo

DIY decorative palm trees in the country: ideas, photo

How many plastic bottles do you need for crafts?

It all depends on the size of the tree. If you have a long area of \u200b\u200blarge size, then you can make a fairly high palm tree with a lush crown. It is enough to take 10-15 plastic bottles of brown color for the barrel. The approximate volume of bottles of 2.5 liters. The larger the bottle, the larger the diameter of the barrel. The crown will need 10-30 plastic green containers. Such a run in quantity is explained by the fact that the shape of the leaves can vary significantly.

How many plastic bottles do you need for crafts?

How to make a palm with your own hands in stages from plastic bottles: step -by -step instructions

There are many ways to make an exotic tree. Methods of cutting bottles are different. It depends on the availability of free time and imagination.

Materials for the manufacture of palm trees:

• 12 bottles with a capacity of 2.5 l of brown
• 20 bottles of green color with a volume of 1.5-2 liters
• Cable, 1-1.5 cm thick
• Metal pipe for the stem

Instructions:

1. Take brown containers and cut the bottom along the contour of the recesses, as a result, the lower part of the bottle should resemble an asterisk
2. 10 cm to the neck of the bottle, cut the container, it should turn out 6 petals
3. On a steel tube, previously digging into the ground, string prepared structures from bottles. You should get a relief barrel
4. Start the manufacture of leaves. It is necessary to cut green containers in half and cut into the strips the upper part. The width of the strip should be 2-3 mm. The thinner the strip, the more fluffy the crown
5. Now string 4 plastic blanks on the cable. The cable should be tough enough. It should bend well, but also keep in shape
6. At the top of the rod with the barrel, attach a sheet of wood with 5 holes in a circle. Insert the prepared leaves into these holes. Correct the bottles if necessary

Barrel workpiece

Barrel workpiece

We collect the barrel

We make leaves

We collect the crown

Ready palm

How to make a palm barrel made of plastic bottles?

The barrel can be made by cutting the pipe from a plastic bottle. But there is also an option that will allow the use of the bottoms. In this case, the raw materials will need much more.

Instructions:

• As a basis for the manufacture of the barrel, you can use even wooden logs, the necessary height
• Cut the bottom in a brown plastic bottle. With the help of screws, screw the bottoms into the barrel
• Do it in a circle, imitating the relief of the palm barrel
• Continue to screw the bottoms to the very top of the log
• But you can make a palm barrel and from the cylindrical part of the bottle
• To do this, the lower part is cut off, and the bottle itself is only cut into 6 petals up to half
• After that, the bottles are interconnected

How to make a palm barrel made of plastic bottles?

How to make a palm barrel made of plastic bottles?

How to make a palm barrel made of plastic bottles?

How to make palm leaves from plastic bottles?

The crown can be made using green plastic bottles. The density of palm branches depends on the number of plastic bottles.

Instructions:

• To do this, take green bottles and cut them into thin strips, after cutting the bottom
• Thus, a branch is formed by several bottles, which are then fastened with each other, by stringing one on another
• If there are not so many bottles, then you can make branches differently. To do this, the green container is cut into 5 parts, not to the end of the bottle. There is a distance in the neck of the neck
• With the help of scissors, a peculiar fringe is made at the edges of the cut petals. It is necessary to make it sticking in different directions
• The resulting leaves must be interconnected by forming the crown

How to make palm leaves from plastic bottles?

How to make palm leaves from plastic bottles?

How to make a crown for a palm tree made of plastic bottles?

To do this, you need the basis, and the blanks of the leaves themselves.

Instructions:

• Take a copper cable cut it into small pieces
• String the blanks on the wire and fix the edges
• If necessary, bend the cable
• Next, it is necessary to insert the leaves mainly for the crown, it can be a metal ring or a blank of wood with holes

How to collect a palm tree from plastic bottles

Palma is assembled from the bottom up. To do this, you will need such components:

• Traffic for the barrel
• Metal pipe
• Crown
• Scotch

Instructions:

• Starting from below, collect the barrel, stringing one by another bottle. You can fasten them using tape or hole punch.
• Collect the crown, setting the leaves in a checkerboard pattern. Spread the branches and rot them using the cable.
• You can give relief and fluffy to the leaves with scissors. Also, heating is used to twist the petals. This can be done using a gas burner or a regular fire.
• It is necessary to connect with tape when it remains 30 cm to the top, it is worth collecting the crown.
• Attach the crown to the barrel. You can fix the top of the palm tree with the barrel using a construction stapler, liquid nails or adhesive tape.

It is not at all difficult to make a palm tree from plastic bottles. It is enough to stock up on patience and show imagination.

Video: Palma from bottles