From the matches you can make a lot of crafts. About one of them - a matching house and will be discussed in the article.
The content of the article
The easiest and most affordable material from which you can do various crafts are ordinary matches. Work with matches is quite painstaking. But despite this, you can relax, develop the imagination, will become more careful and more carefully. And as we know, talented people can even create something unusual and original to create something from ordinary matches.
House made of matches and glue
Matches are considered the most environmentally friendly material for creative work. From such thin sticks you can create whole works of art, for example, a house.
For work, go back:
- Matches
- Glue
- Cardboard
Phatepno
The process of making a house made of matches and glue:
- Take a cardboard sheet. It will serve as the basis of crafts. Lay 2 matches so that they lay in parallel. In order, the foundation did not have distortions, remove the sulfur on the pair. Stick the next row of sticks on these pictures.
- By the same principle, continue laying a number of a number over next to the moment when the house is the necessary height.
- On all formed nodules, drip glue. Before let's start laying a subsequent row, wait that glue grab.
- When the walls grow to the necessary height, start the ceiling mount.
- Apply the thick layer of glue to the resulting overlap so that the design is more durable.
- Get ready roof. The roof of your house will have 2 parts.
- So that each part is more reliable, tie them with 2 rows using glue and an extra match.
- Connect both parts so that you have a single design. Install the roof on the product received.
House made of matches without glue
Even the wonderful crafts can be obtained from matches. From ordinary baubles to large masterpieces. You will have to perform work without using glue. This will greatly simplify the process. We describe you a simpler subject - this is an ordinary cube. It will serve as the basis for making a small house.
For the process, stock:
- Matches
- Tweezers and coin
The process of making a matchmaker without glue:
- Place 2 matches on the table so that they are parallel to each other.
- Place 8 matches perpendicular to these matches so that they watched one way.
- At the top, put the following 8 sticks parallel to the first matches.
- Put the well made of wooden sticks. Heads must be found in different directions.
- So lay out the well consisting of 7 levels of matches.
House
- On top of the product, put 8 sticks parallel to the initial one.
- Put another 6 sticks. They must be placed perpendicular to the central part of the design.
- Put a small coin on top of the matches. At the same time, be extremely careful.
- Insert 4 matches vertically in the corners. They should get into the grooves. Try a little to hold the coin so that the product does not break.
- Stick Similarly throughout the perimeter of the product of the match.
- Make sure that the sticks are closed the top of the cube.
- Now lift the house. 4 sticks should remain on the surface, and you can already remove the coin.
- Put vertical sticks. Hold the cube.
- Align the faces. Turn your workpiece.
- Next, insert matches so that they are placed in parallel to the vertical row. Tips with gray should look in the other side.
- Insert the ranks horizontally (in one face 8 sticks).
- Rows arranged horizontally, should form 4 holes. Insert the sticks into these holes.
- Each log, which is in the last vertical row, pull on 1 \\ 2.
- Between the elongated sticks, insert the other matches, having them like a chessboard.
- After performing every 2 rows, lay out 1 wand less from the same side. You must have a pyramid.
- Under a slight slope, stick a stick for 1 facet.
- Close the next next. So you will have a roof. Then neatly press the matches standing vertically.
- Insert 4 sticks - it will be chimney. Add the windows and the front door.
Create a house
Matching house simple
You can assemble this house very quickly, attracting the attention of your child. Use the following instructions and stock such materials:
- Matches
- Glue
The process of manufacturing the foundation and walls
- Consider, for work you must take glue. But at the same time you do not need to make a house of laying wooden sticks.
- The most common and easy option is the manufacture of the foundation and walls of the house by gluing the logs alternately, glueing them between each other.
- The height of the crafts is determined in advance. Make 4 walls, glue them carefully.
Matching house
The process of manufacturing the window
- The simplest method is the cutting of the window opening on the finished wall with a sharp knife. Carefully secure the dried wall on the surface.
- Slowly, pressing cut the window of any at your discretion. Each edge of the window is told, so that the cuts are pretty fastened.
Roof manufacturing process
- The roof of the hut can make from cardboard paper or gluing several wooden sticks.
- Excellent option - alternately secure short and long matches.
Make a small house, using matches is a fascinating lesson for any person. If you decide to perform a product with a baby, then you should take into account the fact that there can be stains on things from glue. Therefore, carefully follow the child. He should not take glue in his hands, and even more so pull the glue into the mouth.