Men's knitted hats with knitting needles and crochet: description and knitting pattern. How to knit a fashionable men's hat with a double knitting needle, a earflaps, with a lapel, a “zigzag of good luck”, beino?

In anticipation of low temperatures and a series of holidays, we invite you to spend time in pleasure and with benefit: to knit men's hats. The schemes and descriptions presented in the article are suitable for both beginner needlewomen and experienced knitters.

Men 'hat in circular knitting needles: models, schemes

Among the undoubted advantages of products related to circular spokes are the absence of a seam. In addition, work with circular knitting needles removes the load from the hands.

Alaska model

Men's woolen hat tied with circular knitting needles

Such a hat is suitable for a daily men's wardrobe.

Important: accessories for winter sports or winter outdoor activities suggest bright colors!

The size:

• S/M (OG 54/55)
• L/XL (OG 56/58)

You will need to work:

• Yarn, gray color. Composition: 100% wool. Weight - 100 g, Meter - 140 m
• Yarn, the color is blue. Composition: 100% wool. Weight - 50 g, Meter - 70 m
• Circular knitting needles #4.5 (length 40 cm)
• Circular knitting needles #3.5 (length 40 cm)

Circular knitting needles can be replaced with a set of sock/hitch spokes of the corresponding numbers.

Abbreviations that are used in the description:

PV - knitting density
IP - wrong loop
LP - front loop
Kr - circular row

Elastic: alternately 2 lp, 2 IP (to the end of the KR).

The main pattern:

1st cr. Alternately 2 lp, 2 IP (to the end of the KR).
2nd cr. Alternately 3 lp, 1 IP (to the end of the KR).
Continue work, repeating the 1st and 2nd cr.

The main pattern (ALASKA model)

PV knitting needles #4.5 for facial knitting horizontal: 18 loops \u003d 10 cm.
PV knitting needles #4.5 for facial knitting vertically: 38 rows \u003d 10 cm.

Work description:

1. Start the work of blue yarn and knitting needles #3.5. Type 88 loops (for s/m) or 96 loops (for size l/xl) on the knitting needles. Any set of loops is carried out, convenient for you, technology. Distribute the loops scored evenly in a circle. Make sure that the settled edge is located in the center of the resulting circle, and the loops are not twisted. (See video “A set of loops on knitting needles with a fishing line and connecting a row”)
2. knit the first row of LP. Going to the end of the row, secure the working thread and the end of the thread remaining from the set of loops. So you will close the kr. After the formation of the Kyrgyz Republic, put on the right knitting needle the rings-marker. Such a ring located between the first and last loop of the row will make it easy to control the number of knitted rows and not lose the beginning of the Kyrgyz Republic.
3. Knit 4 kr with an elastic band. Be careful: make sure that the LP of the next KR are located above the LP of the previous Kyrgyz Republic.
4. The main canvas (tulle) knit the hats with gray yarn on the knitting needles #4.5. Be careful: LP diagrams should be over the elastic band. The height of the main part is 18-20 cm. The work on the tulya should be completed by the KR, which consists of 2 LP, 2 IP, alternately connected.
5. Design of the bottom (tops) caps:
1st r. Knit alternately to the end of the KR: 2 lp, 3rd and 4th loops, knit together an individual entrepreneur. At the end of the KR, 66 loops (for s/m) or 72 loops (for size l/xl) should remain on the spoke.
2nd r. Alternately 2 lp, 1 IP to the end of the cr.
3rd r. Alternately 2 lp, 1 IP to the end of the cr.
4th p. Knit alternately to the end of the KR: the 1st and 2nd loops knit together with the lp, 1 IP. At the end of the KR, 44 loops (for s/m) or 48 loops (for size l/xl) should remain on the knitting needle.
5th p. Alternately 1 LP, 1 IP to the end of the cr.
6th p. Alternately 1 LP, 1 IP to the end of the cr.
7th p. Knit 2 loops together. At the end of the KR, 22 loops (for s/m) or 24 loops (for size l/xl) should remain on the knitting needle.
8th p. Lp to the end of the cr.
9th p. Knit 2 loops together. At the end of the KR, 11 loops (for s/m) or 12 loops (for size l/xl) should remain on the knitting needle.
6. The end of the work. Cut the working thread and stretch through the remaining loops. Fasten the working thread.

Model Dustland Hat

The hat will be a great addition to the wardrobe of a young stylish man who loves comfort.

Description of the Dustland Hat model

Explanation to the description: 1 ’’ (1 inch) \u003d 2.54 cm

Below are graphic schemes to parts of the main fabric of the cap

Scheme "Part 1" and "Part 4" to the Dustland Hat model

Scheme "Part 2" to the Dustland Hat model

Scheme "Part 3" to the Dustland Hat model

Video: a set of loops for knitting needles with a fishing line and connecting a row

Men's hat with a knitting lapboard: description and knitting pattern

The simplest hat of all possible and at the same time is the most popular. The color scheme can be any

Men's hat with knitting lapels

The size:

• S/M (OG 54/55)
• L/XL (OG 56/58)

You will need to work:

• yarn, gray color. Composition: 70% acrylic, 30% wool. Weight - 150 g, meter - 165 m
• Circular knitting needles #4.5 (length 40 cm). Circular knitting needles can be replaced with a set of sock/hitch knitting needles of the corresponding room.

Abbreviations that are used in the description:

PV - knitting density
IP - wrong loop
LP - front loop
Kr - circular row

Elastic: alternately 2 lp, 2 IP (to the end of the KR).

PV horizontally: 16 loops \u003d 10 cm. PV vertically: 18 rows \u003d 10 cm.

Description of work for socks/hollow knitting needles:

1. Dial 64 loops (for s/m) or 96 loops (for size l/xl). Stitch the first row of LP. In the process of knitting the set -bearing row, evenly distribute the loops to 4 knitting needles: 16 lp on each spoke (for sizes S/M) or 18 loops on each spoke (for the size of L/XL). Make sure that the settled edge is located in the center of the resulting square, and the loops are not twisted. Going to the end of the row, secure the working thread and the end of the thread remaining from the set of loops. So you will close the kr. After the formation of the Kyrgyz Republic, put on the right knitting needle the rings-marker. Such a ring located between the first and last loop of the row will make it easy to control the number of knitted rows and not lose the beginning of the Kyrgyz Republic.
2. The height of the main part of the cap is 25 cm (from the setting edge). Having reached the necessary height, proceed to the knitting of the bottom (tops) of the cap. For this:
• In the Kyrgyz Republic, knit every pair of IP together the wrong side. There will be 48 loops (for s/m) or 54 loops (for size l/xl) on the knitting needles.
• Knit the next 2 kr by the drawing, i.e. A variable 2 lp, 1 IP and so to the end of the cr.
• In the Kyrgyz Republic, knit every pair of lp together with LP. After decreasing on the knitting needles, 32 loops (for s/m) or 36 loops (for size l/xl) will remain.
• Knit the next 2 kr by the drawing, i.e. In a variable 1 lp, 1 IP and so to the end of the cr.
• In the Kyrgyz Republic, knit every pair of loops (lp+IP) together with lp. After decreasing on the knitting needles, 16 loops (for s/m) or 18 loops (for size l/xl) will remain.
• The next 1 kr knitting.
• In the last KR, knit 8-9 times 2 lp together. On the knitting needles there should be 8 (9) lp.
3. ending work. Cut the working thread. The length of the cut thread is 15-20 cm. Extend the thread through the remaining open loops. Fasten the knot.
4. After fixing and cutting all the threads, unscrew the lower part of the cap to 7 (8) cm.

Male Bini hat: how to tie with knitting needles? Men's hat stocking with knitting needles: description and knitting pattern

Bini's cap - fashionable accent

We are all from childhood. Surprisingly, the beino hat, without which no fashion show is about, also from childhood. The mysterious name comes from the French "bejaunus", which means "yellow -rest".

Many boys and girls had such knitted hats without ties and certainly “outgrowth”. In the modern fashionable slang “Bejaunus” it was transformed into “Beanie”, “Beany”, and fashionistas and fashionistas erected a beino hat to the “Must Have” category.

In the Russian-speaking environment, the beino hat is known as a hat-car, a cap-cap, a hat-header.

Binding a fashionable thing is quite simple. View MK presented in the video “Knitting. Bini hat, and you will succeed.

Be careful: the product is not knitting along, but across; When knitting, a partial knitting method or shortened rows is used.

The work uses patch knitting, i.e. All rows are knitted with facial loops (see photo below).

Poster knitting with knitting needles

At the final stage of work, your hat will look like this (see photo below)

Bini's cap, connected by partial knitting (shortened rows)

Video: knitting with knitting needles. Bini cap

Men's hat "Chess" with knitting needles: a scheme with a description

The undoubted advantage of the Schell Pattering Patter is the simplicity of execution and the versatility of use. A hat connected in such a technique is suitable for both a young man and an adult man.

Men's hat "Chess" with knitting needles: a scheme with a description.

Men's hat with pompom knitting needles: description and knitting pattern

The size: S/M (OG 54/55)

You will need to work:

• Brown yarn. Composition: 50% acrylic, 50% wool. Weight - 150 g, meter - 150 m
• NOSIS/SISMENTS OF NOWS #4.5

Abbreviations that are used in the description:

PV - knitting density
IP - wrong loop
LP - front loop
Kr - circular row

Payer knitting:

1st cr. All loops - lp to the end of the cr.
2nd cr. All loops - IP until the end of the cr.
Continue work, repeating the 1st and 2nd cr.

Facial surface:all loops in each kr - lp .

PV knitting needles #4.5 for facial knitting horizontal: 10 loops \u003d 10 cm.

Description of work for socks/hollow knitting needles:

1. Dial 56 loops. Stitch the first row of LP. In the process of knitting, evenly distribute the loops to 4 knitting needles: 14 loops each on each knitting needle. Make sure that the settled edge is located in the center of the resulting square, and the loops are not twisted. Going to the end of the row, secure the working thread and the end of the thread remaining from the set of loops. So you will close the kr. After the formation of the Kyrgyz Republic, put on the right knitting needle the rings-marker. Such a ring located between the first and last loop of the row will make it easy to control the number of knitted rows and not lose the beginning of the Kyrgyz Republic.
2. Stitch 10 kr with a patch with a viscous. So you will form a lapel of a future hat.
3. Continue the work of the front surface. The height of the tula (the main part of the cap) should be 19 cm from the last wrong line of the lapel.
4. To design the bottom (tops), make the following:
• knit every 8th and 9th loops together with lp. After the first decrease, the number of loops should be 50 loops.
• Knit the next 3 kr without decrease. All loops to the end of each kr are facial.
• knit every 7th and 8th loops together with lp. After the second decrease, the number of loops should be 44 loops.
• Knit the next 3 kr without decrease. All loops to the end of each kr are facial.
• knit every 6th and 7th loops together with lp. After the third decrease, the number of loops should be 38 loops.
• Knit the next 3 kr without decrease. All loops to the end of each kr are facial.
• Continue decrease in every 4th kr. As a result of decreases on the knitting needles, 20 loops should remain.
• knit all the loops to the end of the KR 2 together with the LP. There will be 10 loops on the knitting needles.
• knit the last kr: all the loops to the end of the KR - facial.
5. The end of the work. Cut the working thread and stretch through the remaining loops. Fasten the working thread.
6. After fixing and cutting all the threads, the lower part of the cap, tied with a patch, unscrewed.
7. Perform a pompom (see photo below) and sew it on the head of the hat.

How to make a pompom?

Men's hat hat with knitting needles: description and knitting scheme

If someone is trying to convince you that it is difficult to knit a hat-earflap-do not believe it! Even the most inexperienced needlewoman will cope with this work, and the result will undoubtedly impress others.

Hat earflower men with knitting needles: how to knit?

The size: XL (OG 58-59)

You will need to work:

• Brown yarn. Composition: 5% acrylic, 95% wool. Weight - 100 g, Meter - 123 m
• Right knitting needles #4
• Knitting hook #4

Abbreviations that are used in the description:

Pr - turning row
IP - wrong loop
LP - front loop

Payer knitting:

1st r. LP until the end of the pr.
2nd r. LP until the end of the pr.
Continue work, repeating the 1st and 2nd ranks.

Work description:

Beginning knitters scares a feature of the cut of the cap, namely the presence of a lapel/visor in the frontal part of the hat and, of course, the “ears” themselves. However, not everything is so scary.
So:
1. Dial 12 loops. Work in the technique of a pry knitting. At the beginning of each pr, add 1 lp. After the last increase on the knitting needles, there should be 20 loops.

Hat Ushaka Men's knitting needles: Work on the "ears"

2. Knit 14 pr without increasing. At the end of the 14th row, type 8 loops.

The technique of adding loops along the edge of the canvas.

3. After adding, knit another 20 pr. Set aside the part without removing from the knitting needle.
4. Tie the second detail in the mirror reflection of the first.

Men's hat hat with knitting needles: two details of the "ears"

Tip: To make the details as the same as possible, try to knit them simultaneously on one pair of knitting needles, but using two balls/skein of yarn.

5. Separately dial 22 loops. Work in the technique of a pry knitting. At the beginning of each pr, add 2 lp. After the last increase on the knitting needles, there should be 30 loops.
6. knit 24 pr without increasing.
7. Connect parts on the general spoke in the following order (see photo below).

Hat earflaps Male with knitting needles: order connection of parts.

8. After transferring all the parts, the total number of loops is 86. Continue to work in the technique of plate knitting. Knit 36 \u200b\u200bpr.

Hat earflaps men's knitting needles: knitting tula.

9. To design the bottom (tops), make the following:

• knit 2 loops of LP: 12th and 13th; 25th and 26th; 38th and 39th; 51st and 52nd; 64th and 65th; 77th and 78th.
• A row according to the pattern of the pattern.
• knit 2 loops of LP: 11th and 12th; 24th and 25th; 37th and 38th; 50th and 51st; 63rd and 64th; 76th and 77th.
• A row according to the pattern of the pattern.
• knit 2 loops of LP: 10th and 11th; 23rd and 24th; 36th and 37th; 49th and 50th; 62nd and 63rd; 75th and 76th.
• A row according to the pattern of the pattern.
• Continue decrease in every 2nd pr. As a result of decreases on the knitting needles, 20 loops should remain.
• knit all the loops to the end of PR at 2 together with the LP. There will be 10 loops on the knitting needles.
• knit the last row: all the loops to the end are facial.
10. The end of the work. Cut the working thread and stretch through the remaining loops. Fasten the working thread.

Hat earflaps men's knitting needles: Work on the crown of the cap.

11. After fixing and cutting all the threads, unscrew the cap of the hat and fix it with threads to match. Make a connecting seam.

Hat earflaps men's knitting needles: a finished product without a decorative strapping.

12. Decorate the edge of the cap with a decorative strapping “raring step” (see diagram below)

The technique of execution of the decorative strapping "Rachah Step".

How to knit a double men's hat with knitting needles?

Double/bilateral hats made of high -quality yarn are very practical in winter frosts. The video “How to tie a double hat with the front surface” is a detailed master class that answers all the questions that may arise in the process of working on the product.

Video: How to knit a double hat with the front surface?

Men 'hats with knitting needles with ears: description and knitting pattern

Any hat with ears is knitted according to the following scheme:
• Bind the "ears" (two details). The width of each part is 1/5 of the head of the head (OG).
• Bind the lapel/visor (if it is in the description). The width of the part is ¼ ¼.
• Collect details on one spoke (see drawing).

Hat with ears: the location of the parts on the common knitting needle

• knit the main part (tulia).

Hat with ears: knitting tula

• Cut the bottom/top of the product.
• sew, decorate with a decorative strapping.

Below is a detailed description of a men's hat with ears made using the Jacquard technique.

Men's hat with ears, made using the jacquard technique.

If you are not sure that Jacquard is within your power, tie the hat with the front surface, diluting the mono-forever with bright multi-colored stripes.

Men's hat with ears: description of the work.

The jacquard scheme can also be used to knit larger knitted products, for example, sweaters.

Jacquard scheme

Male hat "Zigzag Good luck" with knitting needles: Description and knitting pattern

The model is made by the Zigzag patent elastic band. If for you this technique is a little familiar, be sure to knit a trial sample to understand all the nuances and difficulties of the upcoming work.

Scheme of the Sigzag pattern

The technique is successfully mastered, it's time to move on to knitting the cap. Watching a video MK on knitting a “zigzag good luck” hat will help to avoid possible mistakes.

Video: knitting with knitting needles. Men's hat "Zigzag Good luck". Part 1

Video: knitting with knitting needles. Men's hat "Zigzag Good luck". Part 2

How to knit a male hat with a visor?

Knitted hat with a visor

Hats with visors are a classic that is always relevant. The proposed model is quite easy and does not require filigree skill.

How to knit a male hat with a visor: description of the work

Men's hat made of thick yarn with knitting needles: description and knitting pattern

Men's hat made of thick yarn with knitting needles

Knitted things from thick yarn for several years in trend. The secret of the popularity of such things: comfort and self -sufficiency. Knitting with thick yarn will not take much time, and thanks to the structure of yarn, even the simplest knitting techniques will look original and catchy.

Focusing on the description presented below, you can tie a fashionable and warm set in a matter of hours. The video at the end of the article will talk about key points that you need to pay attention to in the process of working with thick yarn.

Men's hat made of thick yarn with knitting needles: description and knitting pattern

Video: Cat of thick yarn