Pandal knit on two knitting needles and on circular for beginners ordinary and double: diagram, description, secrets. How to knit with a scarf knitting fashionable women's hat?

In the article, you will learn how to knit a hat with a handle with a girdle knit. You will also see the knitting patterns of a simple, voluminous cap, with and without lapels.

Now the market has a wide variety of yarn. Moreover, there are threads for knitting not only of various shades, but also of different thicknesses and quality. Sometimes, passing by the shelves, women cannot resist, and buy yarn with the firm intention to connect something with their own hands for the first time. For beginner needlewomen, information written below is perfect. Let's study how to tie hats of various cuts with a panting viscous.

Pandal knit on two knitting needles and on circular usual and double for beginners: diagram, description

This method of knitting was used by women for a long time. The knitting is called a patch, as it was called in the last century. Previously, warm down scarves for harsh winter were knitted with this method. Knitting this method is quite simple:

• Dial a certain number of loops on two knitting needles
• And notice - you can use both circular and ordinary knitting needles
• Next, start knitting the first row
• Remove the first loop, it should not be knitted
• After knit a number of loops with facial
• Knit the last loops to the wrong side
• Knit all other rows with facial loops, except for only brown loops

Knitting pattern

Coecrates of the pantry knit

• This type of knitting can be diversified. If, for example, you will use thick threads and knitting needles for the process, then the product will turn out to be voluminous.
• So that in the future the knitted thing turns out to be dense knitting - make all the loops with facial ones, except the only hem.
• To make the product more stretched - knit all the loops by the wrong ones, naturally, except for the only brown (first and last)
• If the edges of the finished thing are wrapped, then simply reward it through a damp gauze with an iron.

Pandal knit on thick knitting needles

IMPORTANT: If you knit bromatic loops like ordinary loops, then the edges of the product will be tightened.

How to knit a bottom for a hat?

Many girls do not knit hats because they do not know how to design the bottom of the product. Consider a simple way, how to finish a hat and form a beautiful top of a headdress.

1. If you use woolen yarn weighing 100 g (meter 140 m) in two additions, you will need to dial 65 loops.
2. Tie a hat of the required height (15-18 cm) with a gastard viscous.
3. Further, these 65 loops for five rows should be reduced and five.
4. Thus, in the front row it will be necessary to knit two loops together every four loops, except for the bromic.
5. In the second row, after three loops, we knit two together, again, except the only to only the only
6. In the third, knit two loops through two loops.
7. In the fourth, in three front loops, knit two together.
8. In the fifth every two, knit two loops of one.
9. And then pull the top and get a neat bottom for your hat.

Design of the bottom of the cap

How to reduce and finish the hat with a handkerchief?

There are many ways to arrange the top of the cap.

1. You can crochet the bottom
2. Also, as mentioned above, gradually reduce the loops, and then pull them and fix them
3. In order for the top to be more elongated, the remaining loops at the top of the product is slightly slightly reduced, and then tighten the thread.

Fashionable gray hat with an elastic band connected by a patch

How to knit a simple female hat with knitting needles with a vertical gastard viscous for beginners?

To begin with, stock up on time, patience and yarn. Think about the style of the product right away. Pick up the knitting needles and get down.

Beautiful hat with fur pompon

In order to get such a pretty hat, you need to take lilac threads 100 g (Meter 80), knitting needles 4:

1. Type 60 loops
2. Tie three centimeters with an elastic band - 1 front, 1 wrong
3. Go to the main drawing - patch knitting
4. Knit the necessary hat with facial loops
5. Make the top of the product with an elastic band, gradually reducing the loops
6. Sew a fur bubo

How to knit a fashionable female hat with a handle with a handle knitting needle across?

Such a hat can be tied in one day. For this:

1. Type the required number of loops for the product so that it turns out to be the desired length.
2. First row knit with facial loops, but not to the end. The latter seven loops Leave on the knitting needle. Do not knit them.
3. Second row Knit facial and knit all the loops to the end.
4. The third - We knit again not to the end. Leave six loops, Without knitting.
5. The next row - Knit to the end.
6. The fifth row Knit not to the end. Leave five loops. Knit the rest.
7. Sixth - Knit completely.
8. Next, leave four loops.
9. Eighth - Knit to the end.
10. Next - do not knit three loops.
11. Then again knit the whole with facial loops.
12. Eleventh Leave on the knitting needle two loops.
13. Twelfth knit completely.
14. Next, leave one.
15. Fourteenth knit completely.
16. Fifteenth also knit all.
17. And then we begin to knit again according to the same scheme (leave seven loops, then six, etc.)
18. We knit the hat until the desired width of the product is not obtained.
19. We sew the sides of the product - the cap is ready.

A hat tied with a panting knitting across

Video: Women's hat with knitting needles with a gallop -viscous shortened rows: diagram, description

How to knit a female hat with a spellbound -viscous with a diagonal with knitting needles?

Knitting pattern:

1. Dial one loop
2. Make a cloak, knit the crum loop of the wrong side
3. The third row - Make a cloak, knit the lying loop, imark wrong
4. So we knit until I connect 24 centimeters on the side edge of the product
5. Further on one side we reduce the loops (In each row the last two loops We knit together)
6. And on the other side of the triangle we constantly make one hiccups
7. Thus, you will bind the width of the hat - you get a rectangle
8. Sew the side parts of the cap
9. Pull the top with a thread and fix it

Tender white hat tied with diagonal gastric knitting

Women's hat with a handle with a knitting with a lapel: Scheme, Description

To make the same hat as in the image below, do the following:

1. We collect the length of the product, while also consider the length of the lapel
2. We knit the product according to the scheme - patch knitting across
3. Sew the finished hat

A hat with a lapel of woolen yarn. Payer knitting

Women's hat with a handicraft knitting needle with ears: scheme, description

If you stock up on patience and material, then you can tie a hat yourself.

A delicate white hat-ear

You will need to take white threads, knitting needles, yarn a lingy fluff for decoration of a visor and ears.

1. For knitting, use circular knitting needles
2. Start knitting a hat from your ears
3. Add 20 loops at the edges
4. Then type the visor (as in the diagram below)
5. And knit three parts of the product
6. Then tie the main part of the cap
7. Make the bottom of the cap, as described in the text above
8. Sew the product on the sides

Pattern of the cap-earflaps

How to knit a voluminous female hat with a handle with a stray knit of thick yarn?

These hats most go to children and girls with a small face. After all, they greatly increase the volume of the head. To tie a hat, you will need to take one skein of “Athena” yarn and thick knitting needles No. 8.

1. Dial the loops - 40 pcs.
2. Knit with a patch pattern
3. So knit 14 cm
4. Then start making loops reduction
5. Should be reduced on the side sides of the cap
6. To determine them correctly, count from the extreme loops (first and last) in one and the other side of 10 loops
7. Mark them with a ribbon
8. Now in the area of \u200b\u200bthe 10th loop through a row, reduce four loops
9. The last ten loops on one side and the other side we close two, to make a rounded top

DIY cap

How to knit a double female hat with a handicraft knitting needle?

For a double hat, you will need twice as much threads. After all, you will have to knit two parts of the product, but to warm such a hat in severe frosts will be better.

Knitting scheme:

• First tie a hat with a gateway
• Then tie the inner part of the product
• The length of the inside of the cap should be shorter, exactly as much as longer than the front part, the backlog itself
• Sew two parts of the cap
• Take the internal detail of the product carefully

How to knit a double female hat with knitting needles?

How to knit a fashionable female hat with a scarf knitting knitting needle with a scythe?

Beginning needlewomen, who have already understood how to knit a scarf pattern, will easily figure out the intricacies of the “braid” pattern.

A cap with braids. The main drawing is a shaped pattern

See the scheme provided below. In order to get such a drawing, it should be:

• Use 12 loops for a pattern
• Start knitting first with a plate pattern, so knit 3 loops
• The following knit six with facial loops
• And the rest three prying viscous -this first row
• Second row knit as follows: 3 - facial loops, 6 - wrong, 3- facial
• So alternate until you knit six rows
• Make it on the sixth the cross of the loops
• Then repeat the pattern

How to knit a braid?

Video: How to knit a female hat of bini, a stocking with a handicraft knitting needle?