How to make earrings with your own hands: from beads, leather, atlas, chains, wires, turquoise

In this article, we will consider the process of creating serfs with our own hands.

With the help of certain accessories, you can make the image more completed. Only earrings can give a certain highlight. You can make magnificent earrings from the most affordable materials that every woman has.

You will probably have beads, ribbons, wire and other materials in the reserve. You will only have to supplement these elements with special hooks by launching your own imagination and turning on the creative process.

DIY earrings in the form of brushes

Method 1

This option is considered simpler. For the process of creating silk-knuckles, you will need to stock up:

• Silk threads of various colors.
• Additional fittings, for example, beads, hats, special hooks.
• Glue "moment".
• Thin wire.

Brushes

Production process:

• Cut the threads into segments 22 cm long.
• Fold the threads in half.
• Fix the prepared threads in the center, bandage another thread, cut the ends.
• Pass the wire into the hat. Inside the hat, drip the glue, fix the head of the resulting brush.
• Take the bead. Pass the wire through it.
• Bend the tip of the wire so that you get a hook.
• Cut the excess wire.
• On a hook that is on a cup, hang a hook for earrings.
• Content a brush.

Method 2

For this option, you will also need to take a cardboard so that its side is 10 cm.

The process of making brushes:

• Wrap the silk thread (approximately 200 revolutions) on the cardboard, cut the thread.

Begin

• Pass the other thread under the grilled threads, pull it out, tie the knot.
• On the opposite side of the cardboard, cut the bundle.
• Having retreated approximately 5 mm from the node, wrap the top of the brush with a thread. When you wind several turns, tie a knot, cut the thread.
• Treat the winding with glue. Wrap a ribbon in 2 layers on top of it.
• Take a bead, string a decorative pin. Bend the end of the pin so that a right angle forms.
• Make a loop from the wire, remove the excess part of the decorative pin.
• Fasten the element with bead on the brush, put on Schwenza.

Beauty with your own hands

• If you want, paint the fringe with any alcohol marker.

DIY earrings from a cord

Stell the necessary materials:

• A thin bright cord
• A cord of another shade
• Furniture
• Glue

Earrings from the cord

The process of manufacturing earrings from the cord:

• The cord, for example, is red, cut into 18 cm. In total, you should have 10 such elements.
• Pass the cords in the ring, to which Schwenz should attach.

Schwenza is the basis for any earrings

• Wrap the resulting brush at the top with another cord. In this case, retreat 0.8 cm.
• Fix the end of the cord with glue.
• Contact the finished accessory so that its length is the same.

DIY earrings in the form of bead brushes

For work, stock up on the following materials:

• Beads
• Beads
• Kapronov thread

Also take a thin needle, a pin equipped with a ring, a decorative hat.

From beads

The process of manufacturing brushes from beads:

• Take the needle, string the beads on the thread so that the length is 5 cm. Spend the last element, and continue to string in the other direction through each bead.
• Fasten the resulting thread for a brush on a pin ring.
• Collect such products 20 pcs. Attach everything to the pin.
• Put on the hat on the brush.
• Stroke the bead to the pin.
• Bend the end of the rod into the ring.
• Attach Schwenza to the brush.

DIY earrings with a brush of leather

Stock up:

• Thin skin, preferably natural
• Decorative elements
• Furniture - SHVEVESS
• Glue

You will also have to purchase decorative hats and tips for the cord.

Leather earrings

The process of making leather earrings:

• Cut the rectangles of the desired size from the skin. Cut the skin with thin strips.
• Leave the edge of the product by an underdeveloped one by about 1 cm.
• Turn the strips so that the tube is obtained. Fasten in a special decorative hat using glue.
• Attach Schwenza to the brush.
• Decorate the earring with beads or beads.

DIY earrings "Scarlett"

For earrings, Scarlett must be stock up:

• Wire 1 mm
• Wire 0.8 mm
• Wire 0.6 mm
• Thin chain
• Beads - 4 pcs.
• Suspensions in the form of drops - 4 pcs.

Scarlett

Production process:

• Make SHVEVZ. Take the thinnest wire. Cut 2 pieces so that each is 8 cm.
• Sile the tips of the wire.
• Bend another tip so that you get a loop.
• Using a special tool, while holding a loop, bend the wire.
• You will need such spirals 2 pcs. The tails of products should be approximately 4 cm 5 mm.
• With the help of round -drawers, bend the ends.
• Take the wire 0.6 mm. Cut 15 cm long.
• Wrap the wire on a round stick.
• The spiral that you will succeed.
• Make a ball from a spiral. Leave one tip of the ball free. Fasten it, passing it through the ball that has formed.
• Level the element to get the perfect ball.
• In total, make 6 balls.
• Make a ring. Cut the wire 0.8 mm 12 cm long.
• Take a round element, wind up a wire on it so that you get a ring. Leave one tip a little longer.
• Take a bead in the ring, as well as a suspension.
• Wrap the end that is longer a couple of times, cut the excess wire.
• Put on the ball on the rod, then make a loop.
• Make such 4 pcs.
• Make 2 rings in the form of an oval.
• Make small rings from a 1 mm wire.
• Assume to the SHVEVZAM.
• Take the chain. Disconnect 12 links. At 5, attach the link to the ring of Swesza.
• Attach balls to the chain on the tips.
• At each ball on a small chain, attach 4 links of the chain.
• Attach the blocks to the free ends of the chains.

DIY earrings vintage

This option will require you to stock up:

• Old earrings
• Varnish
• Supercliem
• SHVEVESS
• Rhinestones

Create retro

Production process:

• Take round groove earrings.
• The place where the earring is attached to the carnation, remove it.
• Peel the remains with a file.
• Degrease the outside, paint with varnish to disappear.
• In the central part, attach rhinestones using superglines.
• Attach Schwenza to the earring, and attach Schwenza itself to the double ring.

How to make earrings with a satin ribbon?

In order to make earrings with a satin ribbon, stock up:

• Pin
• Busin sockets - 2 pcs.
• Beads with a diameter of less outlet - 2 pcs.
• SHVEVESS - 2 pcs.
• Rings - 2 pcs.
• Satin ribbon - 0.6 m
• Supercliem

You can make beautiful earrings with ribbons

Production process:

• Cut slices of the length from the ribbon as you want to get the future decoration plus 1 cm.
• Daste with an iron ribbon.
• Dissage one edge of the ribbon.
• Pour the edge with a lighter or above a candle.
• Take glue. Stick a fringe around the perimeter of beads, prone the pin a pin through the hole.
• Put on the outlet, make a loop for mounting.
• Now, using the fastener ring, connect Schwenz with a brush.

How to make earrings in 20 minutes?

So that you get interesting earrings in just 20 minutes, stock up:

• Wire - 0.8 mm
• Supercliem
• SHVEVESS - 2 pcs.
• Pin - 2 pcs.
• Fasteners - 2 pcs.
• Beads - 2 pcs.
• Feathers - 2 pcs.

Ferse

Production process:

• Wrap the wire to something very thin. You should get a spiral of 9 turns.
• Cut the spiral on both sides.
• Bend one tip into a half -ring. At the other tip, raise the turn to form a loop.
• Insert the feather from the side where the half -ring is in the spiral.
• Carefully click so that the pen does not break.
• You can drip a little glue in a spiral.
• Plant the beads on the pins, using the rings, attach them to the Sweszes.
• Bend the ring in each Schwenza, hang the product from the pen.

DIY earrings from chains

Father earrings look quite spectacular. Stock up for them:

• Chains of 12 m - 6 pcs.
• Pin with rings - 10 pcs.
• Transparent beads - 8 pcs.
• Rings - 6 pcs.
• Dividers for beads - 2 pcs.

From chains

Production process:

• Take the pin. Put on him a bead.
• Make a loop from the pin, bite off the excess. So do it with every bead.
• From the pins, make the shells of earrings.
• On the resulting pin, put an element of beads, dividers.
• Light the links on the chain so that 1 cm remains from the edge.
• Hang the blank from the bead.
• Take another chain, retreat a couple of centimeters from its edge.
• On the last chain, retreat 3 cm.
• Select the central part of each chain. In the middle, hang the chains on the separators.

The earrings are ready.

DIY earrings Autumn

You will need the following materials:

• Suspensions resembling small leaves
• Schwenzes - 2 pcs.
• Chains up to 3 cm - 2 pcs.
• Ring for fasteners

Autumn

Production process:

• Using fasteners, attach the leaves to the chain.
• Eliminate the extreme link on the chain, attach the SHVESS.
• Try to alternate the leaves in color. Attach them every 2 links.
• Attach the last leaf to the tip of the chain.

Do -it -yourself bead earrings in the form of rings

The manufacture of accessories is an unusual and at the same time simple work. If you do everything correctly, in the end you will receive beautiful rings, which you can surprise your girlfriends.

Stock up for execution:

• Silver rings-edit 3 cm-2 pcs.
• Silver wire 0.8 mm
• Silver rings 3 mm
• Large beads

Rings in beads

The process of manufacturing earrings in the form of rings:

• Make the SHVESZI out of wire.
• Attach the rings to them using large rings.
• Eliminate small rings, put on such rings a few pieces.
• For each ring with a large diameter, hang colored beads, attach to a ring ring.
• Take the number of such beads at your discretion.
• Take beads of a different color. Hang them on large rings, then attach them to the small ones.

DIY earrings from wire

For the manufacture of earrings from wire you need to stock up:

• Silver wire 1 mm
• Silver wire - 0.8 mm
• Beads - 2 pcs.

There can be wonderful earrings from the wire

Production process:

• Make SHVESS for earrings.
• Bite off 2 pieces of wire so that their length is 8 cm.
• Level the tips of the wire with scissors.
• Twist the wire around a round tube from the carcass, slightly move from the center.
• Bend the long ends of the wire.
• Bend short ends with round -drawers.
• With the help of a file, process the ends.
• Put on the blanks of beads.
• Next, cut 2 pieces of wire 12 cm long.
• Bend the tips with round -drawers.
• Attach to passatigs.
• Using the "plaintos" make spirals.
• With the help of round -liners, bend the spirals several times to form a square figure.
• Make loops. Take it with the help of round -drawers opposite the middle of the spiral, bend up.
• Bend the round -liners a little up, bent the wire, bite off excess.
• Collect all the elements together.

DIY earrings from a stone turquoise

To get earrings from turquoise you will have to stock up:

• Suspensions - 2 pcs.
• Rings - 10 pcs.
• SHVEVESS - 2 pcs.
• Stiftes-bumps-10 pcs.
• Beads

Turquoise

Production process:

• Lay the granules so that you get a beautiful figure.
• Place large, the smallest at the bottom.
• On the pin, string the “figure” of beads. Make a loop.
• Around the skeleton, do the stroke.
• Fasten the last stroke using pliers. So do with all the "columns" 10 times.
• Bend the rings, attach the suspension to the earrings.
• Bend the ring on Schwenza, attach the suspension.
• Make a second earring in the same method.

Simple earrings from beads with your own hands

To quickly make simple earrings from beads, you need to stock up:

• Dark beads 0.3 cm - 82 pcs.
• Wire 0.3 mm - 0.6 mm
• Connecting rings - 4 pcs.
• SHVEVESS - 2 pcs.

Beauty is simple to do

Production process:

• Cut the wire 30 cm long, wear 4 dark beads on it.
• Put 1 bead to one tip of the wire, the other tip of the wire also prick through this bead in the opposite direction.
• You should get a circle similar to a small flower.
• Pass the first tip into 3 beads, the second - in 1 bead.
• Pass the first tip through the bead, which is located on the second tip. You should get 2 small flower.
• Repeat the next 2 rows the same as the previous ones. The result of the work is 7 "flowers".
• On one tip of the wire, string a couple of dark beads, 1 bead to the other.
• Pull one wire through the bead of the first circle. In the opposite direction, pass the other tip of the wire into the bead of the first circle.
• You should get one large circle consisting of beads.
• On two ends of the wire, string a pair of beads. Go in a different direction.
• Twist the excess wire, cut.
• In the same way, make another workpiece.
• At the top of the resulting “flower”, attach 2 rings for connections.
• Attach the SHVESS to earrings.

Earrings are ready. If you love to create something unusual, then our small tips will definitely come in handy.

Video: Create okay earrings with our own hands