How to cross the hook shoes and slippers snowflakes on the New Year's matinee? How does a snowflake pattern fit for boots and slippers to a snowflake costume for a girl?

Knitting slippers and boots for a girl to a snowflake costume.

The content of the article

If you decide your daughter to make a snowflake costume and would like her to wear knitted boots, you do not need to acquire boots in an expensive store. We offer you to make beautiful and warm boots alone.

How to hook a hook shoe snowflakes on a girl: pattern, scheme, description

Currently, knitted boots are considered popular. Since they are made mainly manually, the price is not small.

Crochet-related boots will serve your daughter for more than a year. She will be able to wear them for the New Year, as well as wear around the house in cool winter days.

Please your little princess with beautiful and trendy crochet boots. In them, she can become a real "snowflake" not only on the matinee at school or kindergarten.

It will be able to dance a beautiful dance on New Year's Eve, pleased with all the native and guests. So, proceed to work:

Take woolen insoles. You can buy them quite inexpensively in any shoe store. In our example, boots are described, for the manufacture of which the insole of 21 cm was used.
Welcome insoles with a looping seam by flowing threads. For such a task, it is perfectly suitable: nylon, rubricular threads.
The most important thing is that the threads you choose are very strong and resistant to friction.
Buy such threads, as well as a needle with a big ear in advance in the store with economic goods.

To perform work, you need to take:

50 g acrylic thread (200 m) of white and blue.
Knitting hook - № 1, 5.

To make it easier for you to navigate in the description, we offer you a shortened designation:

Air loop - VP.
A column without a Nakid - ISP.
Column with Nakid - SSN.
Air loop lifting - runway.
Magnificent column - PS.
Connecting column - ss.
Connecting loop - joint venture.

Nondo booze:

Cut the insoles with a looping seam, starting from the middle of the heel. Try, stitches must be smooth, and is located from the friend at an equal distance (approximately 4 mm).
Since acrylic yarn is quite slippery and can unwind, then we advise you with matches, or lighters burn the tip of the thread.
After you reinforce the first insole, you will have one hundred ten hinge.
First row. Get the hook under the stitch stitch and pull the working thread.
Check in the resulting loop air loop (VP).
Get under the next loop and pull out the working thread.
Now check one column without using Nakid (ISP). Check the whole range of ISP.
From the first to the fourth row. Check off.
Fifth row. Make a row with two different threads.
Knit two pisels with white thread, two columns with blue thread and so on.
Loading, which is not used, put along the row.
Get the hook from below, hook a working thread.
Make over the thread of the Nakid, lie it. At the same time, the thread will remain inside the column.
Sixth row. Check the same loop, but shift the drawing on a couple of columns.
Seventh row. Raise the chain for a pair of air looping (VP) blue string. Make one beat, skip the loop, check one VP, again one failure through the loop and one VP and so on.
The eighth row. Check the three lifting air loops (runway). Start from the hole that you have turned out in the past row. Make lush columns (PS).
Decorate with the help of the PS all the edge of the sole.

Nonda Sapozhkin

Top of a booze:

First row. 10 VP and one runway blue string.
Second row. 11 TBI and one runway. Check on the last column a couple.
Third row. 12 TBIs and one runway. Check on the last column a couple.
Fourth row. 13 TBI and one runway. Check on the last column a couple.
Fifth row. 14 TBIs and one runway. Check on the last column a couple.
Sixth row. 15 UBF and one runway. Check on the last table a couple.
Seventh row. 16 ISP and one runway. Check on the last column a couple.
The eighth row. 17 TBI and one runway.
Ninth row. 18 UBF and one runway.
Tenth row. 19 UBS and one runway.
Eleventh row. 20 UBF and one runway.
Twelfth row. 20 UBF and one runway. Turn on the work in the work of white white. Check like this: two white, two blue, two white and so on.
Thirteenth row. 20 UBF and one runway. All knit white thread.
Fourteenth row. 20 UBF and one runway. Threading the blue color is two runways, over one column one will try, then one VP, again through one column, check one will probs and so on.
Fifteenth row. White string 3 runways and 10 ps.
Sixteenth row. 20 ISP and one runway blue.
From 17 to 21 row, they check the sixteenth row.
From 22 to 51 rows, check as from 12 to 21 row.
From 52 to 55 rows, check as from 12 to 15 row.
From 56 to 59 row. 20 ISP and one runway blue.

Knitting scheme

With the help of white string and the failover, tie the perimeter of the top of the booze. Then align the sock of the top and sock of the boat. Tie them with each other using 48 failures.

First row. 62 ISP and one runway. The back of the reinforcement also, applying white string. When you come to the edge, turn.
Second row. 60 TBI and one runway. Repeat a number, reaching the edge of two columns. Turn.
Third row. 58 ISP and one runway. Do not regenerate a couple of tables to the edge.
Fourth row. 57 TBI and one runway. Do not reach the edge of the same column.
Fifth row. 56 Salt and one runway. Do not reach one column.
Sixth row. 55 ISP and one runway. Do not reach one column.
Seventh row. 54 SBS and it runs. Do not reach one column.
The eighth row. One VP, one fail, one VP, one fail. When you knit a bit, while skipping the bottom column.
Ninth row. 3 WFP White threads check 27 ps.
Tenth row. 4 runways, one SSN (column with Nakud), one EP, one SSN and so on.
From 11 to 21 row. Check the mesh as in the tenth row.
Twenty second row. Continuing to knit the same thread, take the top one row consisting of 27 Ps.
From 23 to 27 row. White thread is tied.

Reincate the part with a white scoker grid. Top and shin tie between a friend with a friend with a white string inside the boot.

Knitted boots

In the place where the parts from the outside are joined, do not stroke. Leave the smell and attach some zip to it. Keep over the back of the booze one row of the fails, one row of the SSN, one row.

How to bind a hook slippers snowflakes on a girl: pattern, scheme, description

New Year's dress snowflakes will be perfectly combined with knitted slippers. You can make them in the form of ballet shoes, or moccasin. Try to choose a soft and pleasant yarn for the skin:

Take any cotton threads, for example, gently blue, because the snowflake should look very gently.
You also need a hook knitting number 2.

Knitting slippers

To begin with, tie the sole. If you can not navigate the schemes, then you can follow our instructions:

Dial 17 VP. Start knitting with the third.
First row. 7 TBI, 7 SSN, 7 fails. In the last loop.
Continue to knit on the other side of the chain.
7 SSN, 7 TBI, 4 failures with the last loop.
Then check the connecting column (SS).
Second row. Three VP, SSN in the foundation.
14 SSN, (two SSNs from one loop) - five times, 16 SSN, 3 SSN from one loop, 4 SSN from one loop, 3 SSN from one loop, one SS.
Third row. 3 VP, 15 SSN, (two SSNs from one loop, one SSN) - twice, (three SSNs from one loop) - twice, (one SSN, two SSNs from one loop) - two times, 16 SSN, (two SSN from one loop, one SSN) - twice, (three SSS from one loop) - twice, (one SSN, two SSNs from one loop) - twice, one ss.
Fourth row. One VP. Take the whole range of ISS, finish the SS.
Fifth row. Three VP. Check a series of scan for the rear float soles. Finish a number of SS.
Sixth row. Three VP. Check a number of SSN, finish the SS.
Seventh row. 3 VP, 15 SSN, (two SSNs, check together with the whole vertex) - ten times. Provide a number of SSN, finish the SS.
The eighth row. 3 VP, 14 SSN. (Two SSNs lie along with the whole vertex) - six times. Provide a number of SSN, and finish His SS.
Make 5 joint ventures (connecting loops). Expand slippers and check inside.
Ninth row. 3 VP, 12 SSN.
For the manufacture of the strap, type 20 VP.
Tenth row. Check in 4 loops from the CSN hook, two VP, two columns of the past row skip, lie two SSNs, again, check the two VP, pass two loops of the past row, and then continue knitting until the end of the SSN row.

Bright Slippers for Snowflakes

Tender Slippers for Snowflakes

Snowflake Pattern for Slippers

Bright slippers

So it turned out unusual slippers for a snowflake costume. If you want them to truly fabulous, then decorate them with a fluffy rain, or cut it with snow-white pebbles and sewers. In general, decorate boots at your own request.

Stock Foto Knitted boots and slippers for suits snowflakes

There are many variants of crocheted boots. You may enjoy openwork boots made of several motifs, such as hexagons and squares.

From six such motifs you will have beautiful slippers, and out of ten motives you can make soft boots.
Fantasize, invent, and you will definitely get beautiful and very comfortable boots for your daughter.