Instructions for folding strollers transformer, cane, book.
The content of the article
- How to fold a transformer stroller, 2 in 1 and 3 in 1?
- How to fold the transformer carriage into the car?
- Video: fold the transformer stroller
- How to fold the stroller in the trunk?
- How to fold the stroller-cane?
- How to fold a bookpoint?
- How is the carriage transformer with Aliexpress?
- Video: how to fold the stroller
The stroller is the assistant of every mom, which will allow a long walk with the baby and enjoy the fresh air. After all, walking with the child in summer and winter is very important, as they allow you to temper the baby, and also stimulate the production of vitamin D, under the influence of sunlight. In this article we will tell how to fold the stroller.
How to fold a transformer stroller, 2 in 1 and 3 in 1?
It is worth noting that few women in front of the choice of baby carriages are thinking about how it creates or is going. The fact is that some models are literally one touch. However, most often it is not functional enough, and cannot perform all functions assigned to it. One of the pretty comfortable products is a transformer stroller.
Instruction:
- It represents nothing but a frame and a block that can rise, descend and remake from the cradle into the walking part. The fact is that the main drawback of transformers is that the cradle is less warm, as it is made of fabric, and not from plastic.
- However, this is the only drawback that is peculiar to transformers. It is impossible not to mark and high weight. Because the frame is made of durable materials that can not be light.
- It is all necessary in order to navigate through the bodies without too much, and without obstacles to walk even in the winter in the snow. In order to fold the transformer stroller, you need to perform several simple manipulations.
- Initially, you must remove the upper block. It is usually removed using the latches that are located just below the removable block. Most often, the buttons are designated in red, they must be pulled out, the lock will open, and you can easily pull out the removable part.
- After that, by pressing the pedal, the stroller begins to develop. You need to help her, and press until you get a fully folded stroller. In order for the stroller to be stored in this position, it is necessary to translate the lever to the fixing position so that it does not accidentally have spontaneous disclosure.
- If you need to remove the wheels, then pay attention to the axis to which they are attached. Most often on this axis of the button. After clicking, you can easily remove the wheel. If you did not find a similar button, the retainer is often located on top above the wheel, or directly in the middle.
How to fold the transformer carriage into the car?
Before buying a transformer stroller, be sure to check whether the wheels are removable, this is a prerequisite before transportation. The fact is that in many models there is no need to remove the wheels, because they do not interfere with the carriage in the trunk of the car or inside the car. They are perfectly consigned together with the frame, and do not get out of its limits.
The instruction is quite generalized, so it is necessary to watch the instruction manual for a particular stroller. Because many products for kids are developed by their own rules, and can differ significantly by their design and folding method. Below are several schemes for the most common wheelchairs of transformers, and fold them.
Instruction:
- Very often, the transformer stroller develops immediately with a pleasure, soft block, in which the child can usually be located.
- In order to fold the stroller, there is no need to disgust the upper block and fold the frame. In order to accomplish this manipulation, it is necessary to take the back of the back and make it so that it is on the same line with the horizon.
- The hood is folded, and you get a perfectly smooth surface. Now on the handles, in the field of armrests, you need to find levers and click on them. After that, the handle drops into the area for the hooded product.
- In the area of \u200b\u200bthe armrests there are locksters, it is they who hold the entire design in a horizontal position. After you click on these clamps, you can translate the product to the vertical position. Thus, the entire metal mechanism will work.
Video: fold the transformer stroller
How to fold the stroller in the trunk?
Three strollers in one are often equipped with a children's chair, cradle, and a pleasure block. In such models it is necessary to shoot the upper part, whatever it is.
Instruction:
- That is, the metal frame is directly in such strollers. This is done with the help of special levers that are found in the middle between the wheels, at the very top. On the platform on which the cradle or a walking block is usually located. After pressing these levers or buttons, the stroller folds the book.
- In this case, the cradle or the walking unit can also be folded by moving the hood in a horizontal position. Thus, it is possible to separately carry a metal block in the trunk, and the cradle and a walking unit in the rear seat.
- In no case do not carry a child in the cradle, because there is special children's seats for this. The cradle will not protect the child from collision and possible damage as a result of an accident.
About the ISOFIX system, which allows you to fix car seat for newborns, you can read here.
How to fold the stroller-cane?
The stroller cane is different than the transformer. This is due to the difference in structures and lightweight materials. The main task of canes is the most convenient, maneuverable, easily transported and transferred. Most often, this stroller is used for trips, and walks.
Instruction:
- This option is usually chosen by mothers who loving an active lifestyle and not represent their lives without traveling. A cane will help them in this.
- It is worth paying attention to that most often the cane is not in the form of a book, but is a vertical design. But there are models that add to the type of transformer.
- The simplest variant of stroller-cane is those that fold into the vertical position.
- In order to fold it, it is necessary to rear, in the area of \u200b\u200bthe rear wheels, find a rectangle that is fastened from several metal plates. On the sides of the base there are special clamps, which, when opening, translate this rectangle in the triangle design.
- Accordingly, the rear of this is consistent. Over the front sitting, there are also levers or buttons, with which the stroller is translated into a folded position. In most cases, the seat is soft, moves up and becomes on the same line along with the back.
- This option is most often used in light strollers, weighing up to 7 kg, and a soft back.
How to fold a bookpoint?
If you have a stroller with a rigid back, most likely it is formed by the type of books, like a transformer.
Instruction:
- After all, it is simply impossible to translate into the vertical position. However, it is worth noting that such strollers are more useful for the child, as they create a tough support and prevent the thawing slope during the trip.
- The main advantage of canes is that it can be taken with him on a journey and move through public transport.
- The lack of books is that such a design is not included in the car trunk. That is, it will have to be transported in the rear seat, which is not very convenient if you have not one child, but a few, and the rear sites are engaged in children's car seats.
- In this case, we recommend paying attention to the stroller with the design cane, which is translated into a vertical position. They are not big for their length, and easily fit in the trunk of the car.
How is the carriage transformer with Aliexpress?
In connection with the growth of the dollar, most wheelchairs rose in price. Accordingly, before that, the relatively available models have become quite expensive to consumers who cannot spend a decent amount of money. Therefore, many women began to save, buy strollers used, or on Chinese sites. They are cheap, however, to characterize them as reliable difficult.
This is due to the fact that they have an ill-conceived design, weak fasteners and support. Therefore, very often such strollers break in the welding area, to repair them problematic. With regard to information about how to fold and lay them, it can be found on the seller's website and manufacturer. As for the strollers with Aliexpressthen the most popular are models that can be found here.
Instruction:
- Complete with wheelchairs are often sold raincoats, mosquito nets and even bags. However, they are removed, transported separately from the stroller.
- Indeed, in most cases, the stroller that occupies a vertical position is not able to accommodate a container with a bag and raincoat.
- Similarly also occurs with transformer carriages, some of which even require a preliminary removal of a hood for transportation.
- A feature of the cane is that it can consist of four or three wheels. Many believe that four-wheeled structures are more stable, but in fact it is not.
- The fact is that the front wheel is quite maneuverable, and therefore it is much easier to treat such a carriage. However, it is not entirely as standard, on four wheels.
- Usually the front wheel rises, and is translated into a parallel position relative to the back, and only then the rear wheels are folded, which are connected to each other.
Choose a stroller from proven sellers and be sure to require instructions.