Holders for dumbers: how to make a polymer clay? Personal holders for dumbers: how to use? Whirlscrew with a blank holder: how to sew - patterns

Instructions for making a holder for dust.

With the birth of a child's free time, Mom practically remains. This is a completely normal situation, as now the baby or baby is needed very careful care. Substantial help mom have knacks that simplify the care of the baby. In this article we will tell about the holders for a pacifier.  

Holder for dust: Why is needed?

It is worth noting that these products have become popular for more recently. More precisely with the invention of polymer clay. Many needlewoman decided that the kids just need an accessory, as a holder for nipples.

Holder with name

Advice:

• The fact is that parents whose children do not arrive on breastfeeding, seek to teach their child to the nipple, believing that it makes the kid more calm. It allows you to satisfy the sucking reflex that is present in babies up to two years. This can be done just with the help of the nipple.
• Many parents note that the teaching to the pacifier really makes the child more calm and allows parents to engage in their affairs. And not constantly rushing with the baby. Consultants on breastfeeding, on the contrary, are very negative about the deserts, and in no case do not recommend mothers who feed the baby breasts, to give children a nipple.
• It is believed that such items change the bite of a child, make it wrong, and can also cause a child's refusal. But many pediatricians, in order for the child to be calm, recommend to give him a nipple.
• The fact that children are often spit out the pacifier, especially this happens when the kid wants something to eat, or vice versa, to talk to the children's language.
• In this case, very often the dummy or nipple is on the floor or in a wheelchair. Many mothers used to take with themselves special solutions for disinfection, washed with nipples with water, but in most cases, after the dummy fell to the floor, it must be boiled or sterilized.
• Only in this way you can eliminate all the pathogens of microorganisms. Just the holder for the nipple prevents falling on the floor.  

The holder itself for the nipple is nothing but a lace, on which beads and decorations are riveted. At the same time, on the one hand, there is a loop for a pacifier, and with another fastener element, which is most often represented in the form of clips. Now in the stores of children's toys and even in pharmacies, a huge range of holders for pacifiers are presented.

Holder for nipple

Personal holders for dumbfounders with their own hands?

Many needlewomen work, and make such products independently. However, in fact, there is nothing complicated in the manufacture of this accessory. The case is not at all in the money, but in love, and in the shower that the mother invests into a similar product. It will not be just plastic, the pretty thing you bought in the store. This is a really registered thing in which the soul and the positive energy of the mother is embedded.

Chain for nipple

Instruction:

• In order to make a similar thing independently, there is no need to own any specific skills. All you need is cord, scissors, beads with letters, beads for decor, clips and beads with a protective tip.
• It is necessary to choose beads at the very beginning, which correspond to your child's name. Such products can be easily found in the shop of fittings. To begin, it is necessary to fold twice the wax cord, and at a distance of 7 cm from the loop to tie a nodule. Now you need to wear a bead for a double thread that will hide this node.
• Next, it is necessary to ride decorative beads. It may be thematic options, such as crucibles, facilities, flowers, or elephants. Color range of beads can fit a child's semi or be neutral. Now there are quite popular combinations of yellow and purple flowers, also a great option will be salad, or yellow beads, together with orange mixtures. That is, such a color scheme is suitable as a boy and a girl.
• Most often, just such beads are used in the production of options for sale without behalf. That is, thus, this holder is suitable as a boy and a girl. But in the case when the product is manufactured under a specific child, you can choose the most likely color gamut, without tosing to the semi of the child.
• After the beads for the decoration are riveted on the thread, there comes a queue of name beads. It is necessary to type them in order opposite to writing a name. That is, for this, on paper, write the name of the child, and in reverse order, starting from the end, strip beads on the thread. Next, you need to recruit a certain amount of decorative beads and tie a node. Do not forget to put on a bead that will hide the node. And directly to this edge must be tied to the clip.
• This is done with the help of complex nodes or by fourfold mating. All of these tools and materials can be purchased at any shop of fittings, artistic creativity. After that, it is necessary to cut extra threads, and cut pieces with a lighter.  

Holder with clip

Holder for a pacifier with a polymer clay name

It often happens that certain letters are lacking in the store for the name of your child. In this case, they can be made independently. This is the perfect option for those who are engaged in the manufacture of crafts from polymer clay. You can also buy it in any artistic store. It is sold different colors and is ideal for making beads, for nipple holder.

Holder for nipple

Instruction:

• At the same time, try to choose a children's polymer clay, which is devoid of a large number of preservatives and hazardous substances. Remember that a child will be used by a similar holder.
• Now it is necessary to deal with the design of Beads. If you want to make square beads that form a cube, you need to roll the ball of the desired size, and with the help of a conventional plastic card to press on the one hand, and from the other four sides.
• So you will get a cube. Now with the pin, make a small hole inside. Expand the hole with the stack until it corresponds to the diameter of the rope or thread, on which you drive beads.
• With the help of toothpicks, you can write beaks that you need in order for the holder to be registered. After that, it is necessary to simply decompose the usual parchment or office thin paper and accommodate prepared beads on it.
• It is worth remembering that the polymer clay is baked in the oven at a temperature of 110-130 degrees. The time during which the product is baking is 10-20 minutes. It all depends on the form and size of products. The thicker beads, the longer it should be in the oven.
• In no case to the acceleration of the process, items are not installed in a very hot oven. Thus, you will only ruin beads. After you remove these billets out of the oven, you can additionally paint acrylic paint. It is absolutely safe for the child.
• Beads on which there are letters can also be toned in the zone of direct inscription. This can be done with a thin brush and acrylic paint.

Holder with beads

Holder for a pacifier with your own hands: how to decorate?

The most interesting thing is that it is possible to decorate holders for pacifiers using thematic beads that are made in the form of keksiks, cakes or some tropical animals. To make them with your own hands is quite difficult, but in stores for needlework you can purchase special silicone molds.

Advice:

• They resemble their principle silicone baking forms. Only in this case is a form for the manufacture of pretty parts made of polymer clay. You can also do holes and ride a lace.  
• Please note that there must be absolutely safe materials for the manufacture of pacifier holders. Ideal in this case will be wooden beads, as well as silicone products.
• It is worthwhile to beware of the acquisition of beads made of dubious plastic. You can feel unpleasant odors. From buying such beads should be refused.

Name holder

Whirlscrew with a blank holder: how to sew - patterns

The most interesting thing is that it is not necessary to make standard holders that resemble a chain of beads. A very good and interesting option is the manufacture of a whirlpool with a loop. It is also a kind of holder that performs two in one function.

Instruction:

• In fact, it is a pretty whirlwind in the form of an animal fruit. It can be an elephant with a long trunk. It is on this trunk that there is a small looper with velcro. It is here and joins the dummy or nipple.
• Thus, the child can suck the pacifier for a long period of time, and if necessary, spit, and it will not fall on the floor, and it will hang around the neck. A very unusual, interesting option, the patterns of which you can find below.  
• Practical all objects Children under the year dragged into the mouth. They have very developed taste receptors, and they are inclined to try tooth. Consider this in the manufacture of a nipple holder.

Pattern of the whirlwind

Sketch of the whirlwind

Pattern of the whirlwind

Slash chain with clothespin: Selection of safe materials

You can not use fragile, brittle materials that are able to launch children. This may contribute to the suffocation of the child. In addition, all pretty hard items are desirable to be tied with threads and hooks.

Beads with letters

Most often for the strapping, the technique of knitting a column without a Nakida. Thus, the nipple is quite dense and beautifully envelops the entire bead. Quite often, young mothers combine a peculiar holder for the nipple, rodent, and beads. Similar products are called sling buses, they are often equipped with an additional nipple holder.  

If you do not have time to do needlework, you can turn to craftsmen that produce similar products at home. In this case, they will take into account all your wishes, and make the necessary holder. Some stores have already ready-made holders that are distinguished by their variety and a large assortment. Even the holder without a behalf looks very pretty, unusual.  

Clips for the nipple

Holder for pacifier: how to use?

Some moms and most of the Pap have questions, how to put this holder for the nipple on a pacifier. It is quite simple to do it.

Instruction:

• Take the edge where the loop is located, and put the pacifier on the arc, so that it will be thrown through it.
• After that, it is necessary to see the rest of the canvas, that is, the entire cord, along with the beads in the loop obtained, tighten. As a result, you will find that the dummy will be fixed on a lace from beads.
• In the same way, it is necessary to remove the pacifier if it is stained.

Holder of beads

There are very unusual, interesting models on sale, which differ significantly from homemade. The fact is that in them the lace hides and does not hang. With the help of torque movements, the excess thread hides in the bead. This is a product of German production, but it costs quite somehow. That is why, if you want to save, you can make a holder yourself.  

Video: Nipple holder